Kel Tec Sub 2000 Replacement Sights Are A Must-Have For Your Gun!

Kel Tec Sub 2000 owners know that the factory sights that come with the gun are not very good. In fact, they’re downright terrible. They are much more accurate than the factory sights and they make shooting much more enjoyable. Kel Tec Sub 2000 Replacement Sights are a must-have for your gun.

If you own a kel tec sub 2000 replacement gun, you know it’s a great gun. The following article will help you make your choice easier.Check it out!

Table of Contents

Best Kel Tec Sub 2000 Replacement Sights Comparison 2023

NoNameImageBest ForDetails
1Bushnell Trophy TRS-25 Red Dot Sight Riflescope, 1x20mm, BlackBushnell Trophy TRS-25 Red Dot Sight Riflescope, 1x20mm, BlackBest For Easy To UseView Product
2TRUGLO Tritium Handgun Glow-in-the-Dark Night Sights for Glock Pistols, Glock 17, 17L, 19, 22, 23, 24 and moreTRUGLO Tritium Handgun Glow-in-the-Dark Night Sights for Glock Pistols, Glock 17, 17L, 19, 22, 23, 24 and moreBest For Eye-catching DesignView Product
3IORMAN Ultralight Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear SightIORMAN Ultralight Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear SightBest For QualityView Product
4Pinty Compact Tactical Red Laser Sight with Picatinny Mount Alan Wrenches for Hunting - Easy and BrightPinty Compact Tactical Red Laser Sight with Picatinny Mount Alan Wrenches for Hunting - Easy and BrightBest For PriceView Product
5Crimson Trace CTS-25 Compact Sight with 4 MOA LED Red Dot Reticle and 1x Magnification for Rifles, Long Guns, Defense and CompetitionCrimson Trace CTS-25 Compact Sight with 4 MOA LED Red Dot Reticle and 1x Magnification for Rifles, Long Guns, Defense and CompetitionBest For PopularView Product

Our top pick:

Bestseller No. 1
Performance Services LLC Kel Tec Sub 2000 Gen 2 Replacement Front Sight Pivot Block
  • Stainless steel front sight pivot block redesigned and machined to tighter tolerances to remove the excessive front sight post movement on the Generation 2 Sub 2000. 75% improvement is possible.
  • The original sight housing, sight post, sight post plunger, pivot screw, and all springs are reused.
  • Comes with assembly instructions.
  • Satisfaction guaranteed.
Bestseller No. 2
Performance Services LLC Kel Tec Sub 2000 Gen 1 Thin Front Sight Post/Adjustment Screw Replacement Components
  • Replace the fragile front sight post and adjustment screws in your Generation 1 Sub 2000 with precision machined hard black anodized aircraft aluminum replacements
  • The sight post is 1/16" wide, thinner than the original 3/32" wide sight post. Provides a clearer sight picture for long range shooting.
  • No gunsmiting drop in installation.
  • Installation instructions included.
  • Satisfaction guaranteed.
Bestseller No. 3
Performance Services LLC Kel Tec Sub 2000 Gen 1 Green Fiber Optic Front Sight Post/Adjustment Screw Replacement Components
  • Replace the fragile front sight post and adjustment screws in your Generation 1 Sub 2000 with precision machined hard black anodized aircraft aluminum replacements
  • Green fiber optic insert in a 3/32" wide sight post.
  • No gunsmiting drop in installation.
  • Stainless steel locking hardware included.
  • Installation instructions are included.
Bestseller No. 4
Gen 2 Kel Tec Sub 2000 Front Sight Pivot Block for Aftermarket Fiber Optic/Tritium Sight Post
  • Stainless steel front sight pivot block redesigned and machined to tighter tolerances to remove the excessive front sight post movement on the Generation 2 Sub 2000. 75% improvement is possible.
  • Allows for the installation of popular aftermarket fiber optic and tritium front sight posts that use a large diameter style detent plunger, including Trijicon, Ameriglo, Mounting Solutions Plus and Meprolight.
  • Aftermarket front sight post and detent are not included. Large diameter style detent plunger spring is included.
  • The original Sub 2000 sight housing, pivot screw, and pivot spring are reused.
  • Comes with assembly instructions and a tube of medium strength thread locker.
Bestseller No. 5
Pinty Compact Tactical Red Laser Sight with Picatinny Mount Alan Wrenches for Hunting - Easy and Bright
  • RED LASER SIGHT: This tactical laser sight by Pinty emits a bright and clear 5mW red beam to ensure quick, easy, and precise target acquisition for lasting shooting fun
  • OPTIMAL VISIBILITY: Our compact laser sight reaches up to 330ft/100m away even in poor lighting, catering to all hunting needs with superior long range visibility
  • 20MM PICATINNY MOUNTING: Easily hooking onto your pistols, rifles, and many other handguns & long guns, the built-in reversible mount fits all 20 mm rails.
  • RUGGED CONSTRUCTION: Thanks to its sturdy aluminum build with black oxide finish, our laser sight gives you unnoticeably light weight and reliable protection against corrosion, wear, and shock
  • EASY OPERATION: The intuitive design and provided tools allow easy adjustment of the sight's windage and elevation; enjoy immediate use with the included LR44 batteries, easily replaceable to keep your shooting fun going strong
Bestseller No. 6
Green Blob Outdoors sub 2000 red dot Extremely Low Profile Offset Red Dot Flashlight rail mount
  • TEXAS BASED COMPANY - Green Blob Outdoors low profile mount for the keltec sub2000 red dot. Extremely Low Profile Offset Red Dot Flashlight rail mount for 1 oclock or 11 oclock positions
  • GREAT FIT - Perfect for canted BUIS. You'll be all setup for the distant shot as well as the close quarters shot when puting if get your pop up sights on it and optic sight with magnification on the upper rail
  • LIGHTWEIGHT - Very light, great low profile and fits any 20mm standard picatinny weaver rail. Precision CNC machined from aluminum.
  • LOW PROFILE - Snag-free profile along with optimal placement of your accessory such as a laser sight, flash lights and iron sights. It will hold your accessory up tight against the weapon at the 11 or 1 o'clock positions
  • VERSATILE - Can be installed in one of eight different clock positions. Holds well, and placed at both a good angle and drop point
Bestseller No. 7
Performance Services LLC Kel Tec Sub 2000 Large Aperture Lever Actuated Folding Rear Sight
  • Larger .170" sight aperture as compared to the .125" original sight aperture.
  • The first and best lever actuated rear sight for Kel Tec Sub 2000.
  • Compatible with both the Generation 1 and Generation 2 models.
  • Simple drop in installation. Instructions included.
  • The lever can be mounted on either the right or left side of your rifle.
SaleBestseller No. 8
WOLTIS 45 Degree Offset Rail Mount Picatinny Low Profile Adapter Mount Laser Light Rail Attachment Red Dot Optic Iron Sight Mount fit keltec sub 2000
  • This is one perfect choice for keltec sub2000, your weapon is able to fold all the way when you put on this mount and install some sight models such as UTG red dot on it
  • Perfect for canted BUIS. You'll be all setup for the distant shot as well as the close quarters shot when puting if get your pop up sights on it and optic sight with magnification on the upper rail
  • Can be installed in one of eight different clock positions. Holds well, and placed at both a good angle and drop point
  • Snag-free profile along with optimal placement of your accessory such as a laser, lights and sights. It snugs your accessory up tight against the weapon at 11 or 1 o'clock position
  • Very light, great low profile, fits any 20mm standard picatinny weaver rail. Precision CNC machined from aluminum.
Bestseller No. 9
IORMAN Ultralight Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear Sight
  • Ultralight!!!! MADE of Polyphenylene sulfide is a semicrystalline material. Offers excellent balance of properties, durable and light
  • After many tests and strength tests, it can be used for various gun products of high quality with convenient use and affordable price
  • Good 45 DEGREE OFFSET PUSH BUTTON FLIPS UP WITH EASE - Sights are offset 45 degree to allow you to slightly rotate your rifle to witness target through them and engage. A simple press of the button and your iron sights will pop up quickly.
  • This Sights with Low-Profile Design:Won't Take Up Too Much Space or Interfere Other Accessories When It's Flipped Up. These Angled Sights Work Perfect as a Backup Sight and Give You a Double Assurance
  • For quick transition between iron sights and scopes. Fully adjustable for Windage. Both Precision and CQB apertures on rear sight with standard front sight, help to zero better in medium and short distance.
SaleBestseller No. 10
Laspur Sub Compact Tactical Rail Mount Low Profile Laser Sight for Pistol Handgun Rifle, Build-in USB Magnetic Touch Rechargeable Battery Accessory Remaining Display (Red+Key)
  • ★Low profile, Ultra-lightweight, compact, and tough design. Offers the brightest laser allowed by Law. Two working options (Continuous and pulse), It gives you more choices.
  • ★Smart switch design. Function switch control working options, Long press the function switch to change the working mode. Ambidextrous momentary/ steady On-Off switch Controls activation from either side of the unit
  • ★Three bolt Picatinny mount holds to fit more pistols, Will not loosen due to vibration. The laser fits onto virtually any firearm with a modern (M1913 Pica tinny or Weaver-style) accessory rail. Fit rail-equipped pistols, handgun, rifles, and shotguns. Especially the sunken bolt design can meet more types. it will easily accommodate most universal holsters.
  • ★Build-in battery with magnetic USB charging port. Super convenient USB Magnetic Contact Charging, which solves the problem that the existing USB plug can’t access the USB interface in night or dim light environment. Magnetic recharging allows you to conveniently keep the product mounted to the gun while charging. The battery indicator can prompt the remaining power at any time to avoid the inability to use the product due to insufficient battery power
  • ★It is fully user-adjustable for Windage and Elevation with the provided tool, You can adjust and zero-in this laser easily. Also, if you don't like the product or if something happens to it please return it for a full refund or a new one! No questions asked! We are real humans in the United States with a real company and a real warranty.
Bestseller No. 11
Pridefend Recoil Pad, Recoil Reducing Pad for SUB-2000G2 Rifle,Non-Slip Butt Pad,Recoil Pad for SUB2000G2 Accessories
  • This rubber recoil pad is suitable for SUB2000 GEN2 polymer stock, it lengthens the butt and provides a cushion for the recoil, which helps improve shooting accuracy and better control stability.
  • This shockproof pad really achieve optimal recoil reduction,Increase the stability of shooting and make your shoulders more comfortable.With this pad, you can shoot all day without feeling sore in your shoulders.
  • This butt pad has a texture and horizontal grooved surface, which is more non-slip, helps to secure the rifle to your shoulder,ideal for use in all harsh weather conditions.
  • Installing this recoil pad is super easy, just buckle it on the gun,no other tools required.This stock is not easy to fall off and loose after being put on.It only takes 2 seconds to install,really convenient and fast!
  • The recoil pad is made of durable rubber,well made and soft.Classic black color with texturing.Make your gun look different..if you have any questions, please contact us directly to provide you with a satisfactory solution
Bestseller No. 12
Aimsniper 45 Degree Offset 20mm Picatinny Mount Rail Fit Laser Red Dot Optic Scope for Kel-Tec SUB 2000
  • 【Made From Aluminum Aolly】:Very light weight, great low profile, superior anti-corrosion performance.
  • 【45 Degree Offset Rail】:The laser/red dot sight/optics can be mounted stably at 1 or 11 o'clock position, fitting any 20mm standard Picatinny / Weaver rail.
  • 【Function】:Allows optimal placement of accessories such as lasers and sights. It attaches your accessories tightly to your weapon.
  • 【Easy to Install】:It is fixed on position with 2 screws and can be installed in one of eight different clock positions.
  • 【Usage】:Ideal for offset mounting of a laser or reflex sight, perfect choice for Kel-Tec SUB 2000, your equipment can fold all the way when you put on this mount and install some sight models.
Bestseller No. 13
TUFFORCE 22" x 12" x 3" Rectangular Gun Case, TG-GP22, for AK Pistol, kel-tec sub 2000, Kriss Vector, MCK, Mossburg 715P,PAP M92, Sig Sauer MPX K, FN P90 .... MP5 / GSG5...
  • Tufforce 22" x 12" Rectangular Gun Case for Pistol of AK, Keltec, Kriss Vector, MCK, MP5, Mossberg 715P... Sig Sauer MPX K
  • 6 magazine Holders inside for different sizes of Pistol Magazines,
  • Size: 22" x 12" x 3", 0.8" thickness form and Molly system on back
  • Also to fit for Micro conversion Kit
  • Material : PVC 600 D, Black. More & newest or wholesale, Please see /tufforce.com_
Bestseller No. 14
SimpleSling Sub-2000 - Sling for Kel-Tec Sub-2000, Black, 1 1/2''x62''
  • Works perfect for the Kel-Tec Sub 2000, Adjustable, Lightweight
SaleBestseller No. 15
HiLight P3G Low Profile Green Laser Sight for Sub-Compact and Compact Pistols
  • 🎯 SERIOUS PERFORMANCE BOTH ON THE RANGE AND IN THE FIELD – the P3G has a bright Green laser which is clearly visible especially at night while still meeting law requirements <5mW peak, 532nm, Class 3a.
  • 🎯 DURABLE AND BUILT TO LAST – made from military grade nylon the P3G is designed to work under the harshest conditions to provide reliable performance time and time again. Backed by a 1 year warranty at HiLight Tactical we stand behind our products.
  • 🎯 INCREASED SPEED AND ACCURACY – the included Allen wrench makes it very easy to dial the red dot sight into the distance you want so even when hip firing missing the target becomes a thing of the past.
  • 🎯 EASY SET UP IN JUST A FEW MINUTES – made to work with any Weaver or Picatinny Rail longer than 2.75”. TheP3G can work as an attachment with almost any rifle or pistol excluding Security 9, Shield. The unit comes with one set of mounting bolt although two sets of holes. The purpose of two sets of holes is to adopt wide range of rail length. If you are unsure of fit feel free to ask us.
  • 🎯 LONG LIFE AND ADDED COMFORT – with dual on off switches on both sides this is perfect for any style grip. The included USB rechargeable battery can support 2 hours of performance just off one charge. 🎯 Dimension (L x H x W): 1.8" x 1.1" x 0.8"; Weight: 1.1 oz
Bestseller No. 16
TuFok 45 Degree Offset Rail Mount, Low Profile Flahlight, Red Dot, Airsoft Laser Mount Keltec Sub 2000 Accessories, Black
  • Low profile, super Light, CNC aircraft hard anodized aluminum. Offset rail mount fits standard 20mm picatinny weaver rail.
  • 45 degree offset picatinny rail mount perfectly match for keltec sub 2000, mounts a small red dot sight/scope such as UTG far enough to the side.
  • Picatinny rail mount fixs on position with 2 screws and installs in one of eight different clock positions. Holds well, places at both a good angle and drop point.
  • Perfect for canted BUIS. Setup for the distant and close quarters shot if put your pop up sights on it and optic sight with magnification on the upper rail.
  • Offset rail adapter with Snag-free profile create easy opetation at 11 or 1 o'clock position for red dot sights, airsoft flashlight, laser, sights.
Bestseller No. 17
Rubber Grip Tape Overlay fits Kel-Tec Sub-2000 Gen 2, with G19/23 Size Grip
  • easy to install, self-adhesive grip
  • ultra-thin, doesn't increase size of firearm grip
  • requires no modification to the firearm
  • can be removed if necessary
  • fits Sub-2000 (Sub2K) Gen2 with G19/23 magazine size grip
SaleBestseller No. 18
CVLIFE 1X22X33 Red Green Dot Gun Sight Riflescope Reflex Sight for 20mm Rail
  • Tubeless design with 33mm reflex lens aperture provides a wide field of view, suitable for rapid-firing or shooting of moving targets besides normal shooting
  • Dual illuminated ( red and green);4 reticle shapes in one reflex sight, provide various choices in different occasions, like sunshine, cloudy day.
  • Parallax corrected & unlimited eye-relief, improving the accuracy of holographic sights. Allen head screw type windage and elevation click adjustments, with locking screw, easy to adjust zero and hold well.
  • The red dot sight is precision machined from high grade aluminum alloy with a matte black anodized, includes standard profile Picatinny mounting base. Reflex sight with fully multi-coated lenses provides bright and clear views for the user.
  • Screen Size: 22mmx33mm;Weight: 130g; Item Dimensions:3.15in*1.37in*2.08in(8cm*3.5cm*5.3cm)
Bestseller No. 19
Missouri Tactical Poducts LLC SUB2000G2 Recoil Pad (Black) (Black)
  • Fits SUB2000 GEN2 polymer butt-stock
  • Reduces recoil and muzzle jump allowing for faster target re-acquisition
  • Convex design allows for faster positioning
  • Made from shock absorbing elastomer material to dampen recoil and vibration
  • Offical KEL-TEC SUB2000 Recoil Pad
Bestseller No. 20
EDOG Keltec Sub 2000 Rifle Schematic (Exploded View) Heavy Duty Rifle Cleaning 12”x36” Padded Gun-Work Surface Protector Mat Solvent & Oil Resistant
  • EDOG CERUS GEAR KELTEC SUB 2000 RIFLE (EXPLODED VIEW) SCHEMATIC CLEANING MAT WITH 4 PC FIELD AND BENCH CLEANING ESSENTIALS KIT
  • 12" x 36" ORIGINAL EDOG CERUS PROMAT| PROTECT YOUR FIREARM AND WORK SURFACE | NON – SLIP BASE | SOLVENT & OIL RESISTANT | ROLLS UP FOR EASY STORAGE | HAND WASHABLE -
  • MAT IS SOLVENT & OIL RESISTANT | HAND WASHABLE WITH NON FADE IMPRINT | ROLLS UP FOR EASY STORAGE | SPACIOUS & LIGHTWEIGHT
  • OUR EXPLODED VIEW SCHEMATIC PROMAT ALLOWS YOU VISUALIOZE THE SOMETIMES TRICKY WORLD OF FIELD STRIPPING YOUR WEAPON. JUST CONFIDENT, SIMPLE, DIAGRAM TO HELP YOU GET THE JOB DONE
  • BE THE ENVY AT THE RANGE AND PAIR YOUR WEAPON WITH THE EXPLODED VIEW SCHEMATIC PROMAT , HAVE CONFIDENCE IN CLEANING YOUR RIFLE, LEARNING YOUR WEAPON’S DESIGN WILL BE A BREEZE. PROUDLY MADE & DESIGNED BY & FOR SHOOTERS IN THE USA

Best Kel Tec Sub 2000 Replacement Sights Reviews 2023

Bushnell Trophy TRS-25 Red Dot Sight Riflescope

Sale
Bushnell Trophy TRS-25 Red Dot Sight Riflescope, 1x20mm, Black
  • Matte black featuring a 3 MOA Dot reticle with 11 brightness settings; Mounts easily on most picatinny rails and is compatible with pistols, shotguns, rifles and muzzleloaders.Adjustment Range : 70+ MOA
  • Waterproof construction: O ring sealed optics stay dry inside, even when totally immersed in water. Parallax - 50
  • Shockproof construction: Built to withstand bumps, bangs, drops and the rough and tumble environment of the field
  • Nitrogen purged fog proofing: Nitrogen inside the scope ensures interior optical surfaces won’t fog due to humidity or rapid temperature change

The Bushnell Trophy TRS-25 Red Dot Sight Riflescope is a great investment for anyone who wants to improve their Kel Tec Sub 2000 shooting accuracy. This sight is very easy to mount and is compatible with a variety of firearms. 

It also features nitrogen purged fog proofing and waterproof construction, which makes it ideal for use in any environment. The 3 MOA Dot reticle is perfect for rapid target acquisition, and the 11 brightness settings allow you to customize the sight to your specific needs. 

Overall, the Bushnell Trophy TRS-25 Red Dot Sight Riflescope is an excellent choice for Kel Tec Sub 2000 owners who are looking for a high-quality replacement sight.

Pros: 

  • Bushnell Trophy TRS-25 Red Dot Sight Riflescope is very easy to mount
  • Compatible with a variety of firearms
  • Nitrogen purged fog proofing and waterproof construction
  • 3 MOA Dot reticle for rapid target acquisition
  • 11 brightness settings

Cons: 

  • Some users have reported that the sight is not as accurate as they would like

TRUGLO Tritium Green Gun Night Sight Compatible

Sale
TRUGLO Tritium Handgun Glow-in-the-Dark Night Sights for Glock Pistols, Glock 17, 17L, 19, 22, 23, 24 and more
  • Fits Glock 17 / 17L, 19, 22, 23, 24, 26, 27, 33, 34, 35, 38, 39, 45 (Excluding M.O.S. models)
  • Tritium night sights transition from standard white dot sights during the daylight, to glowing green dots in the the dark
  • Utilizes quality Swiss tritium for maximum brightness and unmatched visibility in all shooting conditions 24/7
  • Glows in the dark with no batteries or light sources needed
  • Compact design maintains factory sight radius and fits standard holsters; Angled rear sight edge for emergency one–hand operation

If you’re looking for a replacement set of sights for your Kel Tec Sub 2000, then you should definitely check out the TRUGLO Tritium Green Gun Night Sight Compatible. 

These sights are incredibly bright and easy to see in all shooting conditions, thanks to the use of quality Swiss tritium. They also don’t require any batteries or light sources, so you’ll never have to worry about them running out of power. And best of all, they’re designed to fit standard holsters and maintain the factory sight radius. 

TRUGLO Tritium Green Gun Night Sight Compatible are a must have for your Kel Tec Sub 2000. The sights are very bright and easy to see in all lighting conditions, day or night. 

They also fit most Glock models, which is great because it means you can use them on multiple guns. The angled rear sight edge makes it easy to operate the gun with one hand, in case of an emergency. 

Overall, these sights are a great addition to your Kel Tec Sub 2000 and are sure to improve your shooting experience.

Pros:

  • Bright and easy to see in all lighting conditions, day or night
  • Fit most Glock models
  • No batteries or light sources required
  • Angled rear sight edge makes it easy to operate gun with one hand

Cons:

  • Some people may not like the green color

Ultralight Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear Sight

IORMAN Ultralight Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear Sight
  • Ultralight!!!! MADE of Polyphenylene sulfide is a semicrystalline material. Offers excellent balance of properties, durable and light
  • After many tests and strength tests, it can be used for various gun products of high quality with convenient use and affordable price
  • Good 45 DEGREE OFFSET PUSH BUTTON FLIPS UP WITH EASE - Sights are offset 45 degree to allow you to slightly rotate your rifle to witness target through them and engage. A simple press of the button and your iron sights will pop up quickly.
  • This Sights with Low-Profile Design:Won't Take Up Too Much Space or Interfere Other Accessories When It's Flipped Up. These Angled Sights Work Perfect as a Backup Sight and Give You a Double Assurance
  • For quick transition between iron sights and scopes. Fully adjustable for Windage. Both Precision and CQB apertures on rear sight with standard front sight, help to zero better in medium and short distance.

If you are looking for a quality set of sights for your Kel Tec Sub 2000, then you need to check out the Ultralight Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear Sight. 

These sights are made from Polyphenylene sulfide, which is a durable and lightweight material. They are also adjustable for windage, so you can get a perfect zero every time. 

The construction is very high quality and it is ultralight, which makes it perfect for a Kel Tec Sub 2000 Replacement Sight. The flip up feature is very easy to use and the sights are very adjustable.

The low-profile design of these sights won’t take up too much space on your gun, and they are the perfect backup sight for when you need it. 

Thanks to the quick transition between iron sights and scopes, you will be able to engage your target faster and more accurately. Order your set today and beprepared for anything.

Pros:

  • Durable and lightweight construction 
  • Adjustable for windage 
  • Flip up feature is easy to use 
  • Low profile design won’t take up too much space

Cons:

  • May not be suitable for all Kel Tec Sub 2000 models

Pinty Compact Tactical Red Laser Sight

Pinty Compact Tactical Red Laser Sight with Picatinny Mount Alan Wrenches for Hunting - Easy and Bright
  • RED LASER SIGHT: This tactical laser sight by Pinty emits a bright and clear 5mW red beam to ensure quick, easy, and precise target acquisition for lasting shooting fun
  • OPTIMAL VISIBILITY: Our compact laser sight reaches up to 330ft/100m away even in poor lighting, catering to all hunting needs with superior long range visibility
  • 20MM PICATINNY MOUNTING: Easily hooking onto your pistols, rifles, and many other handguns & long guns, the built-in reversible mount fits all 20 mm rails.
  • RUGGED CONSTRUCTION: Thanks to its sturdy aluminum build with black oxide finish, our laser sight gives you unnoticeably light weight and reliable protection against corrosion, wear, and shock
  • EASY OPERATION: The intuitive design and provided tools allow easy adjustment of the sight's windage and elevation; enjoy immediate use with the included LR44 batteries, easily replaceable to keep your shooting fun going strong

The Pinty Compact Tactical Red Laser Sight is a must-have for any Kel Tec Sub 2000 owner. This small but powerful laser is adjustable for windage and elevation, and is built with ultra-solid and lightweight T6061 aluminum alloy. 

It’s well-made, compact, and easy to adjust. The detachable Picatinny rail riser makes it easy to mount on all your different firearms. 

This laser sight is perfect for weekend hunting hobbyists and hardcore concealed carriers alike. It provides a tactical advantage in any situation 100m laser wavelength.

The 1913 rail riser easily mounts on all your different Pic rail equipped guns, from shotguns to handguns, and everything in between. The laser wavelength is 650nm, power<1mw 100m, making it perfect for close quarters combat. 

So if you’re looking for a Kel Tec Sub 2000 replacement sight that will give you the tactical advantage you need, look no further than the Pinty Compact Tactical Red Laser Sight!

Pros:

  • The Pinty Compact Tactical Red Laser Sight is well-made and easy to adjust
  • It’s compact and perfect for weekend hunters and concealed carriers
  • Provides a tactical advantage in any situation 100m laser wavelength

Cons:

  • May be too bright for some people

Crimson Trace CTS-25 Compact Sight

Sale
Crimson Trace CTS-25 Compact Sight with 4 MOA LED Red Dot Reticle and 1x Magnification for Rifles, Long Guns, Defense and Competition
  • DIMENSIONS: 2.7" L x 2" W x 2.7" D and a weight of 4.8 ounces - 25mm Lens Diameter
  • RUNTIME: 1 year of battery life powered by (1) CR2032 battery (included)
  • EASE OF USE: Side-accessible battery compartment allows you to change battery without removing from firearm and large function buttons provide for easy brightness adjustments
  • ACCURACY: Sight features 4.0 MOA red dot reticle and 1x magnification for easy target acquisition
  • DURABLE: Shock, impact, fog, water, and vibration resistant design means this sight will withstand normal use

If you’re looking for a replacement sight for your Kel Tec Sub 2000, the Crimson Trace CTS-25 Compact Sight is a great option. It’s small and lightweight, making it easy to carry around, and it’s shock, impact, fog, water, and vibration resistant, meaning it can withstand normal use. 

It also features a 4.0 MOA red dot reticle and 1x magnification for easy target acquisition. The side-accessible battery compartment allows you to change the battery without removing the sight from the firearm, and the large function buttons make it easy to adjust the brightness. 

The only downside is that the turrets are not labeled, so you have to keep track of which direction to turn them for windage and elevation adjustments. 

Overall, the Crimson Trace CTS-25 Compact Sight is a great option for Kel Tec Sub 2000 owners looking for a durable and accurate replacement sight.

Pros:

  • Small and lightweight
  • Shock, impact, fog, water, and vibration resistant
  • Side-accessible battery compartment
  • Large function buttons

Cons:

  • Turrets not labeled

Pinty Rifle Scope 3-9×32 Rangefinder Illuminated Reflex Sight

Sale
Pinty 4-in-1 Rifle Scope Combo, 3-9x32 Rangefinder Scope, Red & Green Dot Sight, Green Laser, 14 Slots Riser
  • 4 in 1, comes with a rangefinder riflescope, a green laser sight, a red/green dot sight and a 14 slots riser everything you will ever need.
  • Magnifications from 3X up to 9X, green/red illuminations with 5 brightness adjustments for both the riflescope and electronic unlimited brightness control for the dot sight, 4 reticle patterns also available for the red/green dot sight.
  • Red/green dot reflex sight with bottom switch - highly accurate optic and substitute for overpriced holographic clear, high resolution image unlimited eye relief and wide field of view.
  • Picatinny mount easily mountable to any 22mm rails; Multi-coated optics with O-ring sealing and nitrogen filling ensures 100% water and fog-proof.
  • Unsurpassed light transmission, uncompromising mechanical performance and clarity.

If you’re looking for a replacement sight for your Kel Tec Sub 2000, the Pinty Rifle Scope 3-9×32 Rangefinder Illuminated Reflex Sight is an excellent option. This scope comes with a rangefinder, as well as green and red lasers sights, making it perfect for any shooting situation. 

The magnification range goes up to 9X, making it ideal for long-range shots, while the green/red illumination and 4 reticle patterns make it easy to target your shot. The reflex sight is also highly accurate and offers unlimited eye relief. 

Plus, with the Picatinny mount, it’s easily mounted to any 22mm rail. And, because it’s nitrogen filled and o-ring sealed, you can be confident that it’s 100% fog and water-proof. 

So, if you’re looking for a Kel Tec Sub 2000 replacement sight that offers superior performance, the Pinty Rifle Scope 3-9×32 Rangefinder Illuminated Reflex Sight is the perfect choice.

Pros:

  • Green and red laser sights
  • Rangefinder
  • 4 reticle patterns
  • Accurate
  • Unlimited eye relief 
  • Picatinny mount for easy mounting

Cons:

  • Others have said that the dot is too small for their liking

UUQ Prism 4×32 Red/Green/Blue Triple Illuminated Rapid Range Reticle Rifle Scope

Sale
UUQ Prism 4x32 Red/Green/Blue Triple Illuminated Rapid Range Reticle Rifle Scope W/ Top Fiber Optic Sight and Weaver Slots
  • High performance optical scope with fiber optic sight, Manufactured Multi-coated optics, Illuminated Red-Green-Blue Rapid Range Glass Etched Reticle.
  • Magnification 4X Fixed , Objective Diameter - 32mm, Crystal Clear Fully Coated Prism Lens for Excellent Light Transmission and the Best Clarity.
  • Combat Ready Rapid Target Acquisition Glass Reticle with Range Finding & Ballistic, Precise 1/4 MOA Click Value for Windage and Elevation Adjustment.
  • Fit all 20 mm weaver and 3/8 inch dovetail rails , Durable all Metal Housing, with Dual - Layer Coated Lens.
  • Built on Proven Robust Platform. Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof.

The UUQ Prism 4×32 Red/Green/Blue Triple Illuminated Rapid Range Reticle Rifle Scope is a great addition to any gun. The high performance optics provide a clear view of your target, while the fiber optic sights make it easy to acquire your target quickly. 

The illuminated red-green-blue rapid range glass etched reticle is perfect for range finding and ballistic calculations. The precise 1/4 MOA click value ensures that your shots are on target, while the durable all-metal housing can withstand the elements.

The magnification is fixed at 4x, which is great for my purposes, and the illuminated red-green-blue rapid range glass etched reticle is extremely useful for acquiring targets quickly in a variety of lighting conditions. 

The construction is also very robust and the scope appears to be completely sealed and nitrogen filled, making it shockproof, fogproof, and rainproof. 

Pros: 

  • The high performance optics provide a clear view of your target. 
  • Fiber optic sights make it easy to acquire your target quickly. 
  • Illuminated red-green-blue rapid range glass etched reticle is perfect for range finding and ballistic calculations. 
  • Precise 1/4 MOA click value ensures that your shots are on target. 
  • Durable all-metal housing can withstand the elements. 
  • Completely sealed and nitrogen filled, making it shockproof, fogproof, and rainproof. 

Cons:  

  • The illuminated reticle can be a bit too bright in low light conditions. 

Veteran Owned Company- DDHQ Red Dot Reflex Sight Scope

Sale
Dagger Defense -Combat Vet Owned Company- DDHQ Red Dot Reflex Sight Scope with Quick Detach Mount- Reflex Sight Optic and Substitute for Holographic red dot Sights
  • Comes with quick detach mount for picatinny rail systems
  • Both red and green dot, four position reticles
  • Comes with locking screws for your sighting adjustments
  • APERTURE:33mm LENGTH:82mm WEIGHT: 291g FIELD OF VIEW: 15.8m@100m RAIL:picatinny
  • 1x Type Red Dot & Green Dot Sight scope, CR1620 Battery- 1x Instruction Manual- 2x Allen Wrench- 1x Lens Cleaning Cloth

If you’re looking for a new red dot sight for your Kel Tec Sub 2000, then you should definitely check out the DDHQ Red Dot Reflex Sight Scope. This sight is great because it comes with a quick detach mount, so you can easily attach it to your gun. 

The quick detach mount makes it easy to attach to my gun, and the four position reticles are a great feature. The locking screws make it easy to adjust my sights, and the overall quality of the scope is excellent. 

Plus, the sight has both red and green dots, so you can choose which one you want to use. The sight also comes with locking screws, so you can make sure that your sighting adjustments are always accurate. 

Overall, the DDHQ Red Dot Reflex Sight Scope is a great option for anyone who wants a quality red dot sight for their Kel Tec Sub 2000. 

Pros: 

  • Veteran Owned Company
  • Quick detach mount for easy installation
  • Four position reticles
  • Red and green dot sights
  • Locking screws for accuracy

Cons: 

  • The 4x magnification is fixed, so you cannot zoom in or out.

AWOTAC Polymer Black Fiber Optics Iron Sights Flip-up Front and Rear Sights

AWOTAC Polymer Black Fiber Optics Iron Sights Flip-up Front and Rear Sights with Red and Green Dots Fit Picatinny Weaver Rails
  • Thumb slide flip-up mechanism, easy to install and to deploy.
  • High-density polymer construction,Non-reflective matte black finish.Polymer front and rear sight Black color, construction extremely light and durable.
  • With Visible Front Red Dot Sight and Rear Green Dot Sight provide the brightest aiming points in low-light conditions.
  • Dual aperture sight Switch between CQB and Precision comes with the windage adjustment option.
  • Compatible with most Picatinny/Weaver rails.

If you’re looking for a replacement set of sights for your Kel Tec Sub 2000, you need to check out the AWOTAC Polymer Black Fiber Optics Iron Sights Flip-up Front and Rear Sights.

These sights are also compatible with most Picatinny/Weaver rails. So if you’re looking for a high-quality, durable, and easy-to-use set of sights for your Kel Tec Sub 2000, the AWOTAC Polymer Black Fiber Optics Iron Sights Flip-up Front and Rear Sights are a great option.

They’re made from high-density polymers and are very light, yet they’re still very durable. The best part is that they come with a thumb slide flip-up mechanism that makes them very easy to install and deploy. 

Plus, they’re black so they won’t reflect light and give away your position. And if you need to switch between CQB and precision aiming, the dual aperture sight is perfect.   

Pros:

  • Very durable
  • High-density polymer
  • Lightweight
  • Thumb slide flip-up mechanisms make them easy to install and deploy
  • Black so they won’t reflect light

Cons:N/A

CVLIFE 1X22X33 Red Green Dot Gun Sight Scope Reflex Sight

Sale
CVLIFE 1X22X33 Red Green Dot Gun Sight Riflescope Reflex Sight for 20mm Rail
  • Tubeless design with 33mm reflex lens aperture provides a wide field of view, suitable for rapid-firing or shooting of moving targets besides normal shooting
  • Dual illuminated ( red and green);4 reticle shapes in one reflex sight, provide various choices in different occasions, like sunshine, cloudy day.
  • Parallax corrected & unlimited eye-relief, improving the accuracy of holographic sights. Allen head screw type windage and elevation click adjustments, with locking screw, easy to adjust zero and hold well.
  • The red dot sight is precision machined from high grade aluminum alloy with a matte black anodized, includes standard profile Picatinny mounting base. Reflex sight with fully multi-coated lenses provides bright and clear views for the user.
  • Screen Size: 22mmx33mm;Weight: 130g; Item Dimensions:3.15in*1.37in*2.08in(8cm*3.5cm*5.3cm)

If you’re looking for an affordable and high-quality red dot sight, the CVLIFE 1X22X33 Red Green Dot Gun Sight Scope Reflex Sight is a great option. It features a tubeless design with a 33mm reflex lens aperture, providing a wide field of view that’s perfect for rapid-firing or shooting of moving targets. 

The sight is also parallax corrected and features unlimited eye-relief. Additionally, it comes with a standard profile Picatinny mounting base and 4 reticle shapes to choose from. And at only 130g, it won’t weigh down your gun.

The dual illuminated reticle is a great feature, and the windage and elevation adjustments are very precise. The construction is very high quality and it looks great on my gun.  

Overall, we are very impressed with the CVLIFE 1X22X33 Red Green Dot Gun Sight Scope Reflex Sight and would highly recommend it to anyone in the market for a red dot sight.

Pros:

  • Affordable
  • High quality
  • Wide field of view
  • Perfect for rapid firing or shooting of moving targets 
  • Parallax corrected
  • Unlimited eye relief
  • Standard profile Picatinny mounting base 

Cons: N/A

UTG 3X Magnifier with Flip-to-side QD Mount, W/E Adjustable

Sale
UTG 3X Magnifier with Flip-to-side QD Mount, W/E Adjustable , Black
  • Broadband Multi-coated Lens to Provide Crystal Clear 3X Image, Wide Field of View - 30% Bigger Than Comparable Models from Other Brands.Compatible Rail-Picatinny/Weaver.
  • Windage/Elevation Adjustability for Optimum View Centering. Refer user manual for list of compatible manuals
  • 42mm Center Height for Most Common Dot Sight Combination, Innovative Flip-to-Side Mechanism for Quick Transition between 1X and 3X Image.Objective Diameter:25mm;Field of View @ 100 yards:45'
  • Adjustable Eyepiece for Easy Dioptric Correction, Patented Quick-detach Lever Lock Mounting Base
  • Precision Machining and Anodizing for Maximum Strength and Wear Resistance, Completely Sealed and Nitrogen Filled for Fog/Weather Proof.Eye Relief: 2 inch

If you’re looking for a way to increase the accuracy of your Kel Tec Sub 2000, then a UTG 3X Magnifier with Flip-to-side QD Mount, W/E Adjustable is a must-have. This magnifier attaches quickly and easily to your gun and provides you with a crystal clear 3X image so that you can take aim with precision. 

The UTG 3X Magnifier with Flip-to-side QD Mount, W/E Adjustable is a great way to improve the accuracy of your Kel Tec Sub 2000. This magnifier attaches quickly and easily to your gun, providing you with a clear 3X image. 

The windage/elevation adjustability ensures that you always have a clear view, while the Quick-detach Lever Lock Mounting Base makes it easy to transition between 1X and 3X images. This magnifier is also nitrogen-filled and sealed for fog/weather proofing, making it a great choice for any situation.

Pros: 

  • Magnifier attaches quickly and easily to your gun
  • Provides you with a crystal clear 3X image
  • Windage/elevation adjustability ensures a clear view
  • Quick-detach Lever Lock Mounting Base makes it easy to transition between 1X and 3X image

Cons: N/A 

Magpul MBUS Flip-Up Backup Sights

Sale
Magpul Flip-Up Backup Sights, Gray, Front Sight
  • Impact resistant polymer construction provides light weight and resists operational abuse
  • Spring-loaded flip up sight easily activated from either side or by pressing the top
  • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
  • Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 rail and provides the same height-over-bore as standard A2 irons
  • Protective wings shield the spring-locking A2 front sight post; Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well

If you’re looking for a replacement set of sights for your Kel Tec Sub 2000, then the Magpul MBUS Flip-Up Backup Sights are a must-have. Made from impact resistant polymer, these sights are light weight and resist operational abuse.

 The new X-Treme MOD 1 sights are a great option for users who want to give their AR15 an old school look while still remaining functional and reliable. They’re also spring loaded, so they flip up easily and stay erect thanks the detent force or pressure from springs inside of them; plus these iron sights provide almost no glare when used during night time operations due in part because there’s no light reflecting off any shiny surfaces on this product like others do which can make seeing targets difficult at times.

And for added protection, the wings shield the spring-locking A2 front sight post. So if you’re in the market for replacement sights, don’t go another day without the Magpul MBUS Flip-Up Backup Sights.

Made from impact resistant polymer, these sights are light weight and can resist operational abuse. They’re also spring-loaded, so they’re easily activated from either side, and they come with a detent and spring pressure to keep them erect. 

These iron sights provide the same height-over bore as standard A2 irons, but they also have a protective wings to shield your sight post.

Pros:

  • Lightweight and resistant to operational abuse
  • Flip up easily and stay erect due to detent and spring pressure
  • Same height-over-bore as standard A2
  • Clamp onto most any MIL-STD-1913 Picatinny/STANAG 4694 rail
  • Replacement sights for Kel Tec Sub 2000

Cons:

  • May be difficult to see in low-light conditions

ATN X-Sight LTV Ultra Light Day & Night Vision Rifle Scope

ATN X-Sight LTV 3-9x Day Night Hunting Rifle Scope , Black
  • QHD+ Sensor ensures a crystal clear image quality at any time and distance; combined with an HD screen and comfortable 3" eye relief.
  • Night Vision mode delivers enhanced and rapid target acquisition in complete darkness.
  • Video Records footage of your hunting pursuits in razor-sharp 720P quality for your future viewing pleasure.
  • One Shot Zero- allows for a fast and easier sight-in of your scope. Plus multiple reticles to choose from.
  • Classic ergonomic design, user-friendly interface and a wide field of view. Easily mountable on virtually any platform with 30 mm standard mount rings.

The ATN X-Sight LTV Ultra Light Day & Night Vision Rifle Scope is a must-have for anyone who owns a Kel Tec Sub 2000. The scope’s QHD+ Sensor ensures a crystal clear image quality, regardless of the time of day or distance. 

Additionally, the Night Vision mode delivers enhanced and rapid target acquisition in complete darkness. The scope also features a video recording function that captures footage of your hunting pursuits in razor-sharp 720P quality. 

Finally, the One Shot Zero- allows for a fast and easier sight-in of your scope. Plus, multiple reticles are available to choose from. The ATN X-Sight LTV Ultra Light Day & Night Vision Rifle Scope is a top-of-the-line scope that is sure to improve your hunting experience.

Pros:

  • Night Vision mode delivers enhanced and rapid target acquisition in complete darkness
  • Video recording function captures footage of your hunting pursuits in 720P quality
  • One Shot Zero makes for a fast and easier sight-in of your scope
  • Multiple reticles to choose from

Cons:

Sig Sauer SOR52001 Romeo5 1x20mm Compact 2 Moa Red Dot Sight

Sig Sauer SOR52001 Romeo5 1x20mm Compact 2 Moa Red Dot Sight, Black
  • 2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditions
  • MOTAC (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000+ hour battery life
  • Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications
  • Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance
  • Includes a M1913 Picatinny low mount riser and a co-witness 1.41in riser mount

If you’re looking for a new red dot sight for your Kel Tec Sub 2000, the Sig Sauer SOR52001 Romeo5 1x20mm Compact 2 Moa Red Dot Sight is an excellent option. 

The sight is made in the USA and features a 2 MOA red-dot, which provides 10 illumination settings (8 daylight plus 2 NV) for optimal visibility no matter what condition you’re shooting under.

The MOTAC (Motion Activated Illumination) is an incredible safety feature that powers up when it senses motion and powers down to conserve energy. This will help you get through 40,000+ hours of battery life.

The integrated M1913 Picatinny interface is a must for any shooters who needs to mount their sights on more than just gunmetal or black hardware. This sight provides dependable performance in all conditions, from rainstorms and snow blizzards up through those pesky foggy morning hours when you’re trying not miss work because of inclement weather.

Sig Sauer’s Romeo5 red dot sight is the perfect choice for your Kel Tec Sub 2000. The co-witness mount and 1913 Picatinny low mount riser make it easy to use on any type of gun, while still providing excellent accuracy at longer distances with high powerlottt Fired from an AR15/M16 carbine or even a shotgun.

Pros:

  • Made in the USA
  • Optimum operational safety and enhanced 40,000+ hour battery life.
  • The integral interface of this mount provides industry-standard mounting options that are perfect for any gun.

Cons:N/A

Feyachi Reflex Sight – Adjustable Reticle (4 Styles) Both Red and Green in one Sight

Sale
Feyachi Reflex Sight - Adjustable Reticle (4 Styles) Both Red and Green in one Sight!
  • Reticle allows for 4 different styles. Dot, Circle/Dot, Crosshair/Dot, Crosshair/Circle/Dot combinations. All in one sight!
  • A 33mm lens provides quick target acquisition. Wide field of view to maintain situational awareness.
  • Very sturdy and secure rail mounting system. Will not come loose, made to last.
  • Parallax corrected & unlimited eye-relief, where the dot goes, so does the bullet!
  • Ultralight, waterproof and shockproof - Powered one 3V lithium battery (included).

If you’re looking for a new reflex sight for your Kel Tec Sub 2000, the Feyachi Reflex Sight – Adjustable Reticle (4 Styles) is a great option. 

This sight can be used in either green or red mode, and features four different reticle styles. It’s also very sturdy, with a secure rail mounting system. 

This sight offers four different reticle styles, so you can find the perfect one for your needs. It’s also very sturdy and secure, with a rail mounting system that won’t come loose.

Plus, it’s ultralight, waterproof, and shockproof. Powered by a 3V lithium battery (included), this sight is a great choice for Kel Tec Sub 2000 owners.

Pros:

  • The Feyachi Reflex Sight – Adjustable Reticle (4 Styles) is a great reflex sight for the Kel Tec Sub 2000
  • This sight can be used in either green or red mode, and features four different reticle styles
  • It’s also very sturdy, with a secure rail mounting system

Cons:N/A

Kel Tec Sub 2000 Replacement Sights Benefits

Kel Tec Sub 2000 Replacement Sights 1

When you are looking for a gun, there are many different things that you will need to consider. One of the most important factors is finding the right sights. Kel Tec Sub 2000 Replacement Sights are a great option because they offer many benefits. Some of the key benefits of these sights include improved accuracy, better stability, and improved visibility. 

Kel Tec Sub 2000 Replacement Sights also offer a number of other benefits that can improve your shooting experience. For example, they are designed to be more durable than factory sights. This means that you will not have to replace them as often. They are also easier to install than many other types of sights. 

If you are looking for a way to improve your shooting accuracy, then Kel Tec Sub 2000 Replacement Sights are a great option. They offer many benefits that can help you shoot more accurately. In addition, they are easy to install and do not require any special tools. 

Improve accuracy 

These sights are designed to be more accurate than factory sights. They offer a number of different features that can help you shoot more accurately. For example, they have a better sight picture and are more stable. 

Better stability

The design of Kel Tec Sub 2000 Replacement Sights makes them more stable than factory sights. This means that they are less likely to move around when you are shooting. In addition, they offer a better sight picture. 

Improved visibility 

These sights offer a number of different features that can improve your visibility when you are shooting. For example, they have a higher visibility in low light conditions. 

Easy to install 

These sights are easy to install and do not require any special tools. 

Kel Tec Sub 2000 Replacement Sights are a great option for anyone who is looking for a way to improve their shooting accuracy. They offer many benefits that can help you shoot more accurately. 

In addition, they are easy to install and do not require any special tools. If you are looking for a way to improve your shooting experience, then Kel Tec Sub 2000 Replacement Sights are a great option.

Factors To Consider When Choosing Kel Tec Sub 2000 Replacement Sights

Kel Tec Sub 2000 Replacement Sights 2

When your Kel Tec Sub 2000 starts to perform poorly, the first thing you will need to do is find a replacement sight. There are many factors you must consider when choosing a new sight for your gun. Here are five of the most important factors to keep in mind.

Sight Type

There are two main types of sights for the Kel Tec Sub 2000: open sights and red dot sights. Open sights are the traditional type of sight that has been used on firearms for centuries. They consist of a front and rear sight that you line up with each other. Red dot sights are a more modern type of sight that uses a red dot instead of iron sights. They are easier to use and allow you to shoot more accurately.

Sight Material

Sights are typically made from either metal or plastic. Metal sights are more durable and will last longer, but they are also more expensive. Plastic sights are less durable but are also less expensive. If you are looking for a sight that will last a long time, then you should choose a metal sight. If you are looking for a cheaper option, then you should choose a plastic sight.

Sight Design

Sights come in different designs, and each one has its own advantages and disadvantages. The most popular designs are the fixed sight and the adjustable sight. Fixed sights are more durable but are not as adjustable as adjustable sights. Adjustable sights are more accurate but are not as durable as fixed sights.

Sight Mount

Sights can be mounted in different ways, and each mount has its own advantages and disadvantages. The most popular mounts are the dovetail mount and the weaver mount. Dovetail mounts are more durable but are not as easily removed as weaver mounts. Weaver mounts are more easily removed but are not as durable as dovetail mounts.

Sight Size

Sights come in different sizes, and each size has its own advantages and disadvantages. The most popular sizes are the standard size and the mini size. Standard sized sights are more accurate but are not as easy to carry as mini sized sights. Mini sized sights are easier to carry but are not as accurate as standard sized sights.

FAQs about Kel Tec Sub 2000 Replacement Sights

Kel Tec Sub 2000 Replacement Sights

What are the different types of Kel Tec Sub 2000 Replacement Sights?

There are two main types of sights for the Kel Tec Sub 2000: open sights and red dot sights. Open sights are the traditional type of sight that has been used on firearms for centuries. They consist of a front and rear sight that you line up with each other. Red dot sights are a more modern type of sight that uses a red dot instead of iron sights. They are easier to use and allow you to shoot more accurately.

What is the most popular type of Kel Tec Sub 2000 Replacement Sight?

The most popular type of sight for the Kel Tec Sub 2000 is the red dot sight. Red dot sights are more modern and easier to use than open sights. They also allow you to shoot more accurately.

What is the most popular Kel Tec Sub 2000 Replacement Sight size?

The most popular size for Kel Tec Sub 2000 Replacement Sights is the mini size. Mini sized sights are easier to carry but are not as accurate as standard sized sights.

How do I mount my Kel Tec Sub 2000 Replacement Sight?

Sights can be mounted in different ways, and each mount has its own advantages and disadvantages. The most popular mounts are the dovetail mount and the weaver mount. Dovetail mounts are more durable but are not as easily removed as weaver mounts. Weaver mounts are more easily removed but are not as durable as dovetail mounts.

Conclusion

If you are looking for a new kel tec sub 2000 replacement sights, then you should consider buying a red dot sight. Red dot sights are more modern and easier to use than open sights. They also allow you to shoot more accurately. 

NoNameImageBest ForDetails
1Bushnell Trophy TRS-25 Red Dot Sight Riflescope, 1x20mm, BlackBushnell Trophy TRS-25 Red Dot Sight Riflescope, 1x20mm, BlackBest For Easy To UseView Product
2TRUGLO Tritium Handgun Glow-in-the-Dark Night Sights for Glock Pistols, Glock 17, 17L, 19, 22, 23, 24 and moreTRUGLO Tritium Handgun Glow-in-the-Dark Night Sights for Glock Pistols, Glock 17, 17L, 19, 22, 23, 24 and moreBest For Eye-catching DesignView Product
3IORMAN Ultralight Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear SightIORMAN Ultralight Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear SightBest For QualityView Product
4Pinty Compact Tactical Red Laser Sight with Picatinny Mount Alan Wrenches for Hunting - Easy and BrightPinty Compact Tactical Red Laser Sight with Picatinny Mount Alan Wrenches for Hunting - Easy and BrightBest For PriceView Product
5Crimson Trace CTS-25 Compact Sight with 4 MOA LED Red Dot Reticle and 1x Magnification for Rifles, Long Guns, Defense and CompetitionCrimson Trace CTS-25 Compact Sight with 4 MOA LED Red Dot Reticle and 1x Magnification for Rifles, Long Guns, Defense and CompetitionBest For PopularView Product
Sale
Bushnell Trophy TRS-25 Red Dot Sight Riflescope, 1x20mm, Black
  • Matte black featuring a 3 MOA Dot reticle with 11 brightness settings; Mounts easily on most picatinny rails and is compatible with pistols, shotguns, rifles and muzzleloaders.Adjustment Range : 70+ MOA
  • Waterproof construction: O ring sealed optics stay dry inside, even when totally immersed in water. Parallax - 50
  • Shockproof construction: Built to withstand bumps, bangs, drops and the rough and tumble environment of the field
  • Nitrogen purged fog proofing: Nitrogen inside the scope ensures interior optical surfaces won’t fog due to humidity or rapid temperature change

The most popular type of red dot sight is the reflex sight. Reflex sights use a small red dot to help you aim. They are very easy to use and allow you to shoot accurately mini red dot sights are also popular. They are smaller and easier to carry than reflex sights. But they are not as accurate as reflex sights. 

Leave a Comment