Ender 3 Motherboard Upgrade- The Best Way To Enhance Your Printing Experience!

The ender 3 motherboard upgrade is a great 3D printer for those looking to get into the hobby or upgrade from an entry-level model. But like any machine, it has its limitations. One area where it could use some improvement is in the electronics department.

If you’re looking for a way to take your ender 3 motherboard upgrade, you need to consider upgrading your motherboard! In this article, we’ll discuss some of the benefits of doing so and recommend a few models that are perfect for the job. Keep reading to learn more

Our top pick:

Bestseller No. 1
CREALITY Ender 3 / Pro Color Display Screen and 4.2.7 32 Bit Silent Control Board with 2021 Marlin Firmware and Easy Installation Complete Plug and Play Upgrade Kit, Guide and Mounting Hardware
  • F1RST LAYER is an authorized distributor of Creality And Antclabs. Amazon customer support is NOT suited for providing the Tech Support needed for this 3D Printing product. PLEASE CONTACT F1RSTLAYER DIRECTLY for the Tech support you need, done right, the F1RST time! Customer satisfaction is our main priority so if you have any questions about this product, please contact us and we will be happy to assist you. MAKE SURE you use the board wiring diagram in this listing’s photos when installing!
  • Ender 3 users can use the Ender 3 Pro firmware already flashed onto the board OR update it with Ender 3 firmware. IF YOU ALREADY HAVE A BLTOUCH or filament runout sensor then you WILL have to update the firmware. THE INSERT CARD THAT COMES WITH THIS PRODUCT HAS A URL LINK WHERE YOU CAN FIND ALL OF OUR FIRMWARE. The process of replacing your board and flashing the firmware will take less than 1 hour and will quickly turn your stock Ender into a multi-featured high end printer in just one upgrade!
Bestseller No. 2
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Pro Customized and Non-Standard Matching,Ender 3 Pro Silent Motherboard
  • Creality new release silent motherboard V4.2.7 to 32bit, compatible with Ender 3 Pro.
  • Super quiet by TMC2225 driver , bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
Bestseller No. 3
Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 5 (Customized and Non-Standard Matching)
  • Super Quiet. Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 & Ender 3 Pro. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from official website.
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
SaleBestseller No. 4
BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3, with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
Bestseller No. 5
Creality Ender 3 / Pro / V2 Plug and Play 4” Color Display Screen + v3.1 BL Touch + 4.2.7 32Bit Silent Board + Runout Sensor All-in-One Upgrade Kit for Auto-Bed Leveling + Improved UI on Stock Printer
  • Please contact F1rst Layer DIRECTLY for all your technical support needs! We are proud to announce the ultimate Ender series “Plug And Play” upgrade kit. Pairing a BL Touch, 4.2.7 Silent 32 Bit control board, Ender 3 V2 color display screen, filament runout sensor, and aluminum handle. All designed to work out of the box with F1RST LAYERS custom firmware flashed from the factory. F1rst Layer is an authorized distributor of all parts included in this kit. Update and download links in description
  • The BL Touch is an incredibly accurate and reliable auto mesh bed level sensor that probes individual spots for differences in Z height on any print surface with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Includes 1.5m extension cable for neat cable management solutions.
Bestseller No. 6
Authentic Creality 4.2.7 32 Bit Silent TMC2225 Motherboard and 24V Ultra Silent Fan Upgrade Kit for Ender 3 / Ender 3 Pro/Ender 5
  • This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others. It also comes with a bootloader pre-installed to for easy firmware updates.
  • The silent fan is intended for use as the hotend cooling fan. The wires are 1 meter long and can reach the control board. Alternatively, the fan can be spliced with the stock fan wires (see product description). The 4.2.7 board is compatible with ALL Ender Series printers as a direct swap for older model v1.1.5. The board is flashed with Ender 3 Pro firmware that works flawlessly on the Ender 3. Ender 3 V/5 users must update firmware (see product description). Firmware update takes 3 minutes.
Bestseller No. 7
Offical Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 V2 Customized and Non-Standard Matching,Ender 3 V2 Silent Mother Board
  • Creality new release silent motherboard V4.2.7, 32bit,compatible with Ender 3 V2
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
Bestseller No. 8
Creality 3D 32bits New Version Upgrade Silent Mainboard Motherboard with TMC2225 Stepper Motor Driver V4.2.7 Version for Ender 3/Ender 3 pro/Ender 3X
  • New Version: This is the newest Silent Controller board for Creality 3D printers
  • Driver:TMC2225 drivers and Boothloader installed the firmware can be modified by ARDUNO with USB cable.
SaleBestseller No. 9
Creality V4.2.7 Upgrade Mute Silent Mainboard for Ender 3 Customized Silent Board, Ender 3 Silent Mother Board
  • Suitable for Ender 3, Silent function Customized and Non-standard matching.
  • The TMC2225 driver is super quiet.Main control chip is STM32F103RET6.
SaleBestseller No. 10
BIGTREETECH SKR Mini E3 V3.0 32Bit Control Board for Ender 3, Ender3 Pro, Ender 3 V2 3D Printer with TMC2209 UART Stepper Driver,Compatible with BL Touch, TFT35 E3
  • 【✅Main control chip upgrade 】SKR MINI E3 V3.0 main control chip upgrade Adopts STMicroelectronics G0 series MCU STM32G0B1RET6,the instructions will be sent to the 3D printer faster and more accurately.
  • 【✅Improved cooling effect】Upgraded heat sink improves heat dissipation,trengthen the drive heat dissipation capacity;Thermistor inputs are protected from short circuit to Vin;Added a third PWM controlled cooling fan output,It can better protect the circuit board and prolong the life of the motherboard.
Bestseller No. 11
Creality Ender 5 Pro Upgrade 3D Printer with Silent Motherboard Metal Extruder Frame and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm
  • Upgraded Metal Print Head Frame: The upgraded metal print head of ender 5 pro has better and stronger pressure, which can push the filament into the printer nozzle. And the pressure of the extruder gear can be adjusted as needed, because the upgraded extruder kit has adjustable bolts.
  • Silent Motherboard: Official ender 5 pro has ultra-quiet motherboard, quieter and more precise. The upgraded motherboard has solid filters and capacitors, which can provide better ESD protection and more stable performance TMC Ultra-quiet drive 256 subdivision for finer printing.
Bestseller No. 12
Creality Direct Drive Extruder Kit,New Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers
  • 【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions.
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation.
SaleBestseller No. 13
Creality Ender 5 Pro 3D Printer Upgrade Silent Motherboard and Metal Feeder Extruder with Capricorn Bowden PTFE Tube
  • 【Upgraded V4.2.2 silent Mainboard】Ender 5 pro Upgrade Motherboard Silent Mainboard with TMC2208 Driver
  • 【Metal Extruder Frame】Creality Ender 5 Pro 3D Printer is a highly durable metal extruder . This feature provides stronger pressure while pushing filament through the 3D Printer's nozzle
SaleBestseller No. 14
Official Creality Ender 3 V2 3D Printer Upgraded Integrated Structure Design with Silent Motherboard MeanWell Power Supply and Carborundum Glass Platform Printing Size 8.66x8.66x9.84 inch
  • Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
Bestseller No. 15
Creality Ender-3 S1 Pro 3D Printer Ender-3 S1 Upgrade with 300°C High-Temperature Nozzles PEI Spring Steel Plate LED Light Sprite Direct Dual-Gear Extruder CR Touch Automatic Bed Leveling
  • 🏆【300°C High-temp Nozzle】:The brand new nozzle made of brass can stand up to 300°C printing temperature, and it is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.
  • 🏆【Spring Steel PEI Magnetic Build Plate】:Ender-3 S1 Pro has used the spring steel PEI magnetic build plate, which has good adhesion to the printed model and enables fast heating up of the heat bed. The build plates is not only durable but also flexible. Once the printing completes, users can remove the printed mdel effortlessly with just a slight bend.
Bestseller No. 16
BIGTREETECH Upgraded SKR Mini E3 V3.0 Silent Board 32bit Mainboard Integrated with TMC2209 Stepper Driver Support Marlin/Klipper Firmware Compatible with Ender V2 Ender 3 Pro/5 3D Printer
  • 🌟【High Compatibility】SKR MINI E3 V3.0 Control board compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.
  • 🌟【Multiple Functions】It Supports BLTouch, RGB lights, blocking detection, shutdown function. What ’s more, it also supports TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.
Bestseller No. 17
CREALITY Ender 3 S1 3D Printer (Upgraded Ender 3 V2) with Sprite Dual-Gear Direct Drive Extruder CR Touch Auto Bed Leveling Silent Board Filament Sensor High Precision Extra Glass Bed 8.6x8.6x10.6inch
  • Sprite Direct Dual-Gear Extruder: The "Sprite" direct dual gear extruder developed by Creality 3D has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning.
  • CR Touch Auto Bed Levelling: The CRTouch 16-point auto levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed.
Bestseller No. 18
Creality Ender-3 S1 Pro 3D Printer Features 300°C High-Temperature Nozzles Sprite Direct Dual-Gear Extruder CR Touch Automatic Bed Leveling PEI Spring Steel Plate LED Light
  • 🏆【300°C High-temp Nozzle】:The brand new nozzle made of brass can stand up to 300°C printing temperature, and it is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.
  • 🏆【"Sprite" Full-metal Dual-gear Direct Extruder】:The "Sprite" full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments, especially the flexible TPU.
Bestseller No. 19
Creality Ender 3 / Pro / V2 / 5 Plug and Play Deluxe LCD Color Touch Screen with 4.2.7 32-Bit Silent Control Board and Silent Fan Upgrade Kit - Improved UI and Faster Operation (Now Open Source)
  • This Ender 3 touch screen is now FULLY open source thanks to a partnership between First Layer with Insanity Automation. The ONLY open source Ender touch screen on Amazon fully Plug-And-Play from the factory flashed with our custom firmware for more features than ever. NEWLY SUPPORTED: dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders and more!
  • A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 / V2 / Pro / 5 on the market. Along with more added features than any other touch screen available today, this is THE best version of this product available on Amazon right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen
SaleBestseller No. 20
Upgraded Creality Ender 3 V2 3D Printer with 1KG White and 1KG Black PLA Filaments, Integrated Structure Design with Silent Motherboard and Meanwell Power Supply, Printing Size 8.66x8.66x9.84 inch
  • Silent Motherboard: Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing.

Table of Contents

Best Ender 3 Motherboard Upgrade Reviews 2022

Creality Ender 3 / Pro / V2 Plug and Play 4” Color Display Screen

Creality Ender 3 / Pro / V2 Plug and Play 4” Color Display Screen + v3.1 BL Touch + 4.2.7 32Bit Silent Board + Runout Sensor All-in-One Upgrade Kit for Auto-Bed Leveling + Improved UI on Stock Printer
  • Please contact F1rst Layer DIRECTLY for all your technical support needs! We are proud to announce the ultimate Ender series “Plug And Play” upgrade kit. Pairing a BL Touch, 4.2.7 Silent 32 Bit control board, Ender 3 V2 color display screen, filament runout sensor, and aluminum handle. All designed to work out of the box with F1RST LAYERS custom firmware flashed from the factory. F1rst Layer is an authorized distributor of all parts included in this kit. Update and download links in description
  • The BL Touch is an incredibly accurate and reliable auto mesh bed level sensor that probes individual spots for differences in Z height on any print surface with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Includes 1.5m extension cable for neat cable management solutions.

If you’re looking for an Ender 3 upgrade, this is the kit to get! The BL Touch is incredibly accurate and reliable, and the Ender 3 V2 color display screen is a great addition – it’s running the aftermarket Jyers UI with dozens of features over stock Creality firmware. 

This Ender 3 / Pro / V2 Plug and Play 4” Color Display Screen is a great upgrade for your Ender 3 printer! The BL Touch probe is incredibly accurate and reliable, and the Ender 3 V2 color display screen is a great addition, with lots of features not available on the stock Creality firmware. 

This kit comes with everything you need to get up and running, including a filament run-out sensor and CR-6SE handle. The installation process is very straightforward, and the results are definitely worth it! We highly recommend this upgrade for anyone looking to improve their Ender 3 printing experience.

The 4.2.7 control board is also very impressive, with its 32-bit silent control and Trinamic stepper drivers. This kit also comes with a filament run-out sensor and an aluminum handle for easy moving and handling. Overall, this is an excellent upgrade kit that will enhance your Ender 3 printing experience!

Pros:

  • The BL Touch probe is incredibly accurate and reliable
  • The Ender 3 V2 color display screen is a great addition, with lots of features not available on the stock Creality firmware
  • This kit comes with everything you need to get up and running, including a filament run-out sensor and CR-6SE handle

Cons:

  • The installation process is a bit time-consuming

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Pro Customized and Non-Standard Matching,Ender 3 Pro Silent Motherboard
  • Creality new release silent motherboard V4.2.7 to 32bit, compatible with Ender 3 Pro.
  • Super quiet by TMC2225 driver , bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.

If you’re looking for an easy way to enhance your Ender 3 printing experience, then the Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 is a great choice! 

This board comes pre-installed with the Ender 3 Pro firmware, and features thermal runaway protection to help keep your printer running smoothly. Plus, the TMC2225 driver ensures quiet operation. 

Whether you’re looking to upgrade your Ender 3 or simply want an easy way to improve your printing experience, the Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 is a great choice!

Pros:

  • Pre-installed with Ender 3 Pro firmware
  • Thermal runaway protection
  • TMC2225 driver for quiet operation

Cons:

  • May require additional hardware for full functionality

Creality Ender 3 v2 New Motherboard Silent Mainboard V4.2.7

Creality Ender 3 v2 New Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5 3D Printer
  • Super Quiet. Compatible with Creality Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 v2. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from Official website.
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.

If you’re looking for a great motherboard upgrade for your Ender 3, the Creality Ender 3 v2 New Motherboard Silent Mainboard V4.2.7 is a great option! This motherboard is super quiet, and it’s compatible with the Ender 3 v2, Ender 3 Pro, and Ender 3. 

It also comes with TMC2225 drivers and Creality V0.0.6 firmware, making it a great option for those looking to get the most out of their 3D printer. 

Additionally, the thermal runaway protection is a great feature that will help keep your printer running safely and smoothly.  

So if you’re looking for a great motherboard upgrade for your Ender 3, the Creality Ender 3 v2 New Motherboard Silent Mainboard V4.2.7 is a great option!

Pros:

  • Super quiet
  • Compatible with Ender 3 v2, Ender 3 Pro, and Ender 3
  • Comes with TMC2225 drivers and Creality V0.0.6 firmware
  • Thermal runaway protection

Cons:

  • The price is relatively high compared to other Ender 3 upgrades

BIGTREETECH SKR Mini E3 V3.0 Upgraded Silent Board Motherboard

Sale
BIGTREETECH SKR Mini E3 V3.0 Control Board Silent 32-Bit Controller Board Motherboard for Ender 3 Integrated with TMC2209 UART Stepper Motor Driver Based on V2.0 Compatible with Ender 3 Pro/5 3D Printer
  • ⭐【MCU and EEPROM 】This new SKR Mini E3 V3.0 motherboard adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 improving previous revisions, in addition to including a 4KB 24C32 on-board EEPROM.
  • ⭐【Mute 3D Printing 】 Onboard heating covering TMC2209 silent stepper drivers with UART mode,which makes 3D printing exprience much quieter.

If you’re looking for a great motherboard to upgrade your Ender 3 printing experience, the BIGTREETECH SKR Mini E3 V3.0 is an excellent option! 

This motherboard features an MCU and EEPROM upgrade, which makes it much faster and quieter than earlier versions. Additionally, the heatsink has been upgraded for better heat dissipation, and there are three PWM-controlled cooling fans for optimum cooling profiles. 

Plus, the customer service from BIGTREETECH is top-notch, so you can be sure you’ll be supported if you have any questions or issues. Overall, the BIGTREETECH SKR Mini E3 V3.0 is an excellent choice for anyone looking to upgrade their Ender 3 printer.

Pros: 

  • MCU and EEPROM upgrade make it faster and quieter than earlier versions
  • Heatsink has been upgraded for better heat dissipation
  • Three PWM-controlled cooling fans for optimum cooling profiles

Cons: 

  • Some users have reported issues with the fan connectors
  • Others have found the customer service to be unresponsive

CREALITY Ender 3 / Pro Color Display Screen and 4.2.7 32 Bit Silent Control Board

CREALITY Ender 3 / Pro Color Display Screen and 4.2.7 32 Bit Silent Control Board with 2021 Marlin Firmware and Easy Installation Complete Plug and Play Upgrade Kit, Guide and Mounting Hardware
  • F1RST LAYER is an authorized distributor of Creality And Antclabs. Amazon customer support is NOT suited for providing the Tech Support needed for this 3D Printing product. PLEASE CONTACT F1RSTLAYER DIRECTLY for the Tech support you need, done right, the F1RST time! Customer satisfaction is our main priority so if you have any questions about this product, please contact us and we will be happy to assist you. MAKE SURE you use the board wiring diagram in this listing’s photos when installing!
  • Ender 3 users can use the Ender 3 Pro firmware already flashed onto the board OR update it with Ender 3 firmware. IF YOU ALREADY HAVE A BLTOUCH or filament runout sensor then you WILL have to update the firmware. THE INSERT CARD THAT COMES WITH THIS PRODUCT HAS A URL LINK WHERE YOU CAN FIND ALL OF OUR FIRMWARE. The process of replacing your board and flashing the firmware will take less than 1 hour and will quickly turn your stock Ender into a multi-featured high end printer in just one upgrade!

If you’re looking for an easy way to upgrade your Ender 3, the Creality Ender 3 / Pro Color Display Screen and 4.2.7 32 Bit Silent Control Board is the perfect solution. 

This board replaces your old motherboard, and comes with a pre-installed bootloader to make firmware updates a breeze. Plus, it features Trinamic stepper drivers for quieter operation and supports a BL Touch or filament run out sensor.

 Installation is quick and easy, so you’ll be up and printing in no time. And if you have any questions, the customer support team is always happy to help. So don’t wait any longer, upgrade your Ender 3 today with the Creality Ender 3 / Pro Color Display Screen and 4.2.7 32 Bit Silent Control Board!

The board upgrade is great! The new color screen makes the UI much more refined, and the new control board with original TMC2225 Trinamic stepper drivers is very quiet. 

If you already have a Bltouch or filament runout sensor, then you will need to update your firmware. Overall, this is a great upgrade that will quickly turn your stock Ender 3 into a high-end printer.

Pros:

  • Installs quickly and easily
  • Replaces old motherboard
  • Pre-installed bootloader

Cons:

  • May need to update firmware for BL Touch or filament run out sensor

Ender 3 Upgraded Silent Board Motherboard V4.2.7

Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 5 (Customized and Non-Standard Matching)
  • Super Quiet. Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 & Ender 3 Pro. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from official website.
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.

This motherboard is designed to be super quiet, and it’s compatible with a variety of printers, including the Creality Ender 3, Ender 3 Pro, and Ender 5. It comes with a TMC2225 driver and Creality V0.0.6 firmware, and it’s pre-installed with a bootloader. 

Plus, thermal runaway protection is enabled, so you can rest assured that your printer is safe from overheating. 

Any questions or issues you have with this product can be easily resolved by our professional customer service team. Don’t wait any longer, order your Ender 3 Upgraded Silent Board Motherboard V4.2.7 today!

Pros:

  • Super quiet
  • Thermal runaway protection
  • Compatible with a variety of printers
  • Pre-installed bootloader

Cons:

  • May require some technical knowledge to install

Creality Ender 3 / Pro / V2 / 5 Plug and Play Deluxe LCD Color Touch Screen

Creality Ender 3 / Pro / V2 / 5 Plug and Play Deluxe LCD Color Touch Screen with 4.2.7 32-Bit Silent Control Board and Silent Fan Upgrade Kit - Improved UI and Faster Operation (Now Open Source)
  • This Ender 3 touch screen is now FULLY open source thanks to a partnership between First Layer with Insanity Automation. The ONLY open source Ender touch screen on Amazon fully Plug-And-Play from the factory flashed with our custom firmware for more features than ever. NEWLY SUPPORTED: dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders and more!
  • A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 / V2 / Pro / 5 on the market. Along with more added features than any other touch screen available today, this is THE best version of this product available on Amazon right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen

If you’re looking for an easy way to take your Ender 3 printing experience up a notch, then look no further than the Creality Ender 3 / Pro / V2 / 5 Plug and Play Deluxe LCD Color Touch Screen 

This touch screen is now FULLY open source thanks to a partnership between First Layer with Insanity Automation, and it comes loaded with tons of great features that aren’t available on the stock Ender 3 control board. 

Not only does it add support for dual gear extruders, filament sensors, mesh bed leveling, and change filament functions, but it also includes a built-in PID tuner, silent touch screen mode, and direct drive extruder support. 

Plus, the upgraded silent fan included in this kit is a great way to reduce the noise level of your printer.

Overall, we were really impressed with the Creality Ender 3 / Pro / V2 / 5 Plug and Play Deluxe LCD Color Touch Screen. It’s a great upgrade for any Ender 3 owner, and it’s sure to take your printing experience to the next level!

Pros: 

  • Adds support for dual gear extruders, filament sensors, mesh bed leveling, and change filament functions 
  • Built-in PID tuner 
  • Silent touch screen mode 
  • Direct drive extruder support 

Cons:N/A

BIGTREETECH SKR V1.4 Turbo 32Bit Silent Control Board

BIGTREETECH SKR V1.4 Turbo 32Bit Silent Control Board with LPC1769-120MHz Frequency 3D Printer Parts VS SKR V1.3 Support TMC2209 TMC2208 TMC2226 Stepper Motor Driver
  • √ 1. 【Main Control Chip】:Performance has been significantly improved with the LPC1768 series Cortex-M3 main control chip with 32-bit main frequency and 120 MHz ARM level;√2. 【Power】 :Using dedicated M6130 power chip, support 12-24V power input;
  • √2. 【Work mode】: The SPI and UART work mode controlled by the TMC driver, which also has the DIAG pin, which eliminates the need for a complex wiring process and can be used by simply pulling the jumper cap off.

If you’re looking for a great motherboard to upgrade your Ender 3 3D printer, the BIGTREETECH SKR V1.4 Turbo 32Bit Silent Control Board is a great choice.

This board features a LPC1768 series Cortex-M3 main control chip with 32-bit main frequency and 120 MHz ARM level, meaning that it’ll provide a significant performance boost over the stock Ender 3 board. 

Additionally, the board features a dedicated M6130 power chip which supports 12-24V power input, and also has an SPI and UART work mode controlled by the TMC driver. 

Plus, with its double Z-axis interface, you won’t have to worry about any issues with expanding your printer’s capabilities. 

So if you’re looking for a top-quality motherboard to take your Ender 3 to the next level, the BIGTREETECH SKR V1.4 Turbo 32Bit Silent Control Board is a great option!

Pros: 

  • Trinamic stepper drivers for quieter operation
  • Supports BL Touch or filament runout sensor
  • Quick and easy installation

Cons:

  • Some users have reported issues with the screen’s responsiveness

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade

Sale
BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3, with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.

This board is packed with features that will enhance your printing experience, such as an ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz for fast and reliable performance, and the ability to upgrade the firmware via SD card. 

Plus, the integrated UART mode of the TMC2209 makes debugging a breeze. And if that’s not enough, the board also features an expansive 12864 screen mode that makes it easy to keep track of your print progress. 

With so much to offer, the BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade is a great choice for anyone looking to take their 3D printing to the next level!

This motherboard upgrade has really enhanced my 3D printing experience. The ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz makes the motherboard more stable and faster. The integrated UART mode of TMC2209 also simplifies debugging of motherboard and driver. 

Pros: 

  • Fast and reliable performance with an ARM Cortex-M3 series STM32F207VCT6 chip
  • Firmware upgradeable via SD card
  • 12864 screen mode for easy print progress monitoring

Cons: 

  • Some people might find the price a bit high

Authentic Creality 4.2.7 32 Bit Silent TMC2225 Motherboard

Authentic Creality 4.2.7 32 Bit Silent TMC2225 Motherboard and 24V Ultra Silent Fan Upgrade Kit for Ender 3 / Ender 3 Pro/Ender 5
  • This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others. It also comes with a bootloader pre-installed to for easy firmware updates.
  • The silent fan is intended for use as the hotend cooling fan. The wires are 1 meter long and can reach the control board. Alternatively, the fan can be spliced with the stock fan wires (see product description). The 4.2.7 board is compatible with ALL Ender Series printers as a direct swap for older model v1.1.5. The board is flashed with Ender 3 Pro firmware that works flawlessly on the Ender 3. Ender 3 V/5 users must update firmware (see product description). Firmware update takes 3 minutes.

If you’re looking for a way to reduce the sound of your Ender 3 printer, then look no further than the Authentic Creality 4.2.7 32 Bit Silent TMC2225 Motherboard. 

This board comes with original TMC2225 Trinamic stepper drivers, which greatly reduce the sound of the stepper motors during use. Additionally, the board is flashed with Ender 3 Pro firmware, which works flawlessly on the Ender 3.

The sound difference it makes is incredible- it’s almost silent compared to the original motherboard. Installation was a breeze and it’s compatible with all Ender Series printers, making it a great upgrade option. 

 Overall, this is a great way to enhance your printing experience and make your printer much quieter.

Pros:

  • Original TMC2225 Trinamic drivers reduce sound of stepper motors
  • Ender 3 Pro firmware works flawlessly on Ender 3
  • Compatible with all Ender Series printers
  • Installation a breeze

Cons:

  • Not compatible with older versions of the Ender 3 printer

Creality 3D 32bits New Version Upgrade Silent Mainboard Motherboard

Creality 3D 32bits New Version Upgrade Silent Mainboard Motherboard with TMC2225 Stepper Motor Driver V4.2.7 Version for Ender 3/Ender 3 pro/Ender 3X
  • New Version: This is the newest Silent Controller board for Creality 3D printers
  • Driver:TMC2225 drivers and Boothloader installed the firmware can be modified by ARDUNO with USB cable.

Are you looking for a motherboard upgrade to improve your 3D printing experience? If so, the Creality 3D 32bits New Version Upgrade Silent Mainboard Motherboard may be just what you need! 

This board is designed to work with TMC2225 drivers and Boothloader installed the firmware can be modified by ARDUNO with USB cable. Thermal runaway protection is enabled.

The Board is Optimized by Circuit ,effectively solve the Heating Problem. Plus, it comes with USB Port,can be Worked with E/Z/Y/X Axis Motor Fimware 1.1.8 pre-installed – making it super easy to get started!

Pros:

  • Works with TMC2225 drivers
  • Boothloader installed
  • Thermal runaway protection enabled
  • Optimized by Circuit
  • USB Port

Cons:

  • Firmware can only be modified by ARDUNO with USB cable

Creality Ender 3 Motherboard, Creality Ender 3 Silent Board,New Upgraded Motherboard

Creality Ender 3 Motherboard, Creality Ender 3 Silent Board,New Upgraded Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 5 3D Printer
  • ❤【New Upgraded ender 3 silent board】Germany imported TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB). When you are in a quiet environment, you can safely and boldly perform 3D printing operations without apologizing, and you never need to worry about noise disturbing others.Creality V4.2.7 32-bit silent motherboard printing smoother and the running speed is obviously accelerated.1 Year Warranty.
  • ❤【HUMANIZED DESIGN, EASY TO REPLACE】The 3D printer models compatible with the Ender-3 silent motherboard are: Ender-3/Ender-3 Pro/Ender3 v2/Ender-5.We can choose a silent motherboard for any of these products. Because these models are all DIY models.PLEASE NOTICE: It only pre-installs the Ender-3 firmware, if you want to install it in your Ender-3 Pro/Ender3 v2/Ender-5, you need to install the corresponding firmware.DO NOT TRY RANDOMLY.If you need the firmware, please contact us freely.

This amazing piece of hardware features a number of improvements over the standard motherboard, including a TMC ultra-quiet motor drive chip, ultra-quiet system design, and support for 24V input voltage. 

With these amazing features, you’ll be able to print at much higher speeds and with much less noise, making it the perfect choice for any 3D printing enthusiast!

One of the best things about the Creality Ender 3 Silent Board is that it’s very easy to install and replace. Whether you have an Ender-3, Ender-3 Pro, or Ender-5, you’ll be able to simply swap out your old motherboard for this new one with no hassle. 

Additionally, the board comes pre-loaded with Marlin 2.0.1 and a bootloader, so you won’t have to go through the trouble of flashing your printer with a new firmware. Simply insert the SD card, power on the printer, and wait 10 seconds for the firmware update to complete.  

Pros:

  • TMC ultra-quiet motor drive chip 
  • Ultra-quiet system design 
  • Supports 24V input voltage 
  • Easily installed and replaced 
  • Preloaded with Marlin 2.0.1 and a bootloader

Cons: 

  • Some users have reported that the fan connectors are reversed (this can be easily fixed with a firmware update)

Newest SKR Mini E3 V2.0 32Bit Control Board Integrated

Newest SKR Mini E3 V2.0 32Bit Control Board Integrated with TMC2209 UART Driver Upgrade SKR Mini E3 V1.2 for 3D Printer Parts for Ender 3 V2.0 3D Printer(firmware Install for Ender 3)
  • 💐【32 Bit High Performance Microprocessor】SKR MIN E3 V2.0 is a silent control board adopts 32 bit ARM level Cortex-M3 series STM32F103RCT6,72MHz frequency Microprocessor, which is designed for ENDER 3 3D printer particularly,a perfect replacement motherboard of the Ender3 printer.
  • 💐【Support a variety of Functions】SKR MINI E3 board supports BLTouch, RGB lights, blocking detection, shutdown function.What ’s more,it also supports TFT35 E3 V3.0,TFT35 V3.0,TFT28 V3.0 touch screen,original 12864LCD of Ender 3 printer.

 This board supports a variety of functions, including BLTouch, RGB lights, blocking detection, and shutdown function. The board features a 32 bit ARM level Cortex-M3 series STM32F103RCT6 microprocessor, which is designed for the Ender 3 printer particularly. 

Additionally, the board comes with ultra-silent TMC2209 V1.2 drivers, which use StealthChop2 technology to reduce stepper sound and provide a smooth operation. The TMC2209 drivers also have excellent heat dissipation capabilities, which can lower the temperature when they are in use. 

Overall, the Newest SKR Mini E3 V2.0 32Bit Control Board Integrated is a great option for those looking to upgrade their Ender 3 printer!

Pros:

  • New 32 bit ARM Cortex-M3 microprocessor
  • Support for BLTouch, RGB lights, blocking detection, and shutdown function
  • Features TMC2209 V1.2 drivers with StealthChop2 technology

Cons:

  • Some users have reported issues with the included software

Bilway Ender 3 v2 Screen Kit 4.3 Inch Display Screen User-Friendly UI Interface

Bilway Ender 3 v2 Screen Kit 4.3 Inch Display Screen User-Friendly UI Interface for Ender 3 V2 3D Printer Parts
  • Ender-3 V2 Screen Kit: Screen Kit for Ender-3 V2 3D printer. 4.3 inch color HDscreen.
  • Modular Design: Easy installation, the screen is tilted to make a wide vision and easy to operate, it can be fixed directly on the 3D printer base.

If you’re looking for an easy-to-use and user-friendly LCD screen kit for your Ender 3 V2 3D printer, then the Bilway Ender 3 v2 Screen Kit 4.3 Inch Display Screen is a great option to consider. 

This kit includes a color HDscreen that displays clear views in good contrast, making it easy to see your prints in progress. The modular design makes installation a breeze, and the screen can be tilted for a wide vision and easy operation. 

Plus, with its new UI interface, this screen kit allows for even easier use of your 3D printer. And with its mass memory, you’ll have plenty of space to store pictures and files. 

So if you’re looking for an upgrade that will enhance your 3D printing experience, the Bilway Ender 3 v2 Screen Kit 4.3 Inch Display Screen is a great choice.

Pros:

  • HD screen provides clear and easy to read views
  • Modular design makes installation a breeze
  • Screen can be tilted for wide vision and easy operation
  • New UI interface is even easier to use
  • Mass memory allows for plenty of storage space

Cons:

  • May require some minor firmware changes for full compatibility

BIGTREETECH Mini12864 LCD Graphic Smart Display Control Board

BIGTREETECH Mini12864 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 Prusa-i3 3D Printer RAMPS 1.4 RepRap VORON 2.4 3D Printer Mendel Prusa Arduino
  • 1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.
  • 2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.

If you’re looking for a great way to improve your 3D printing experience, the BIGTREETECH Mini12864 LCD Graphic Smart Display Control Board is the perfect upgrade for you.

This board features RGB multi-color backlight support, as well as SD card support so you can easily access slicing files. It also comes with encoder parameter adjustment capabilities, making it easy to fine-tune your prints. 

Plus, the plug-and-play design makes it a breeze to install on your RAMPS setup. And if you ever have any problems with the board, simply get in touch with BIGTREETECH’s outstanding customer support and they’ll be happy to help you out. 

Pros:

  • RGB multi-color backlight support
  • SD card support for easy access to slicing files
  • Encoder parameter adjustment for fine tuning prints
  • Plug and play design is easy to install
  • Excellent customer support if needed

Cons:

  • A bit pricey

Ender 3 Motherboard Upgrade Benefits

Ender 3 Motherboard Upgrade 2

If you’re looking for an easy way to improve your Ender 3’s performance, then upgrading the motherboard is a great option. By doing so, you can enjoy faster printing speeds, improved accuracy, and greater reliability. 

Plus, you’ll be able to use more complex print files, resulting in better-quality prints. So if you’re ready to take your 3D printing to the next level, then don’t hesitate to upgrade your Ender 3’s motherboard.

The Ender 3 motherboard upgrade is a great way to improve your 3D printing experience. By replacing the stock motherboard with a more powerful one, you can enjoy faster printing speeds, improved accuracy, and greater reliability. 

Additionally, the upgrade allows you to use more complex print files, resulting in better-quality prints. If you’re looking to take your Ender 3 to the next level, then this upgrade is a great option.

Enjoy faster printing speeds

With a more powerful motherboard, you can enjoy faster printing speeds and improved accuracy.

Use more complex files

With a more powerful motherboard, you can use more complex 3D print files, resulting in better-quality prints.

Improved accuracy and reliability

A more powerful motherboard can help improve the accuracy and reliability of your 3D printer.

Use more complex print files for better-quality prints

With a more powerful motherboard, you can use more complex 3D print files, resulting in better-quality prints.

Take your Ender 3 to the next level

With a powerful motherboard upgrade, you can take your Ender 3 to the next level of performance.

Factors To Consider When Choosing Ender 3 Motherboard Upgrade

Ender 3 Motherboard Upgrade 3

When it comes to upgrading your Ender 3 motherboard, there are a few things you need to take into account. Here are five factors to consider when making your decision:

Compatibility

Make sure that the new motherboard is compatible with your printer. Some motherboards are only compatible with certain models of printers, so be sure to check before you buy.

Cost

Be sure to factor in the cost of the upgrade when making your decision. While a more powerful motherboard will generally cost more, it’s important to weigh this against the benefits you’ll enjoy.

Installation

Consider how difficult it will be to install the new motherboard. If you’re not comfortable with electronics, it might be best to choose a board that’s easy to install.

Reviews 

Be sure to read reviews of the motherboard you’re considering before you make your purchase. This will give you an idea of what others think of the product and whether or not it’s right for you.

Support

When you’re choosing a new motherboard, be sure to pick one from a company that offers good customer support. This way, if you have any problems with the product, you can get help from someone who knows what they’re doing.

These are just a few things to keep in mind when you’re looking for the best Ender 3 motherboard upgrade. By taking these factors into account, you can be sure to choose the right product for your needs.

FAQs About Ender 3 Motherboard Upgrade

Ender 3 Motherboard Upgrade

What are the benefits of upgrading the Ender 3 motherboard?

There are several benefits to upgrading the Ender 3 motherboard. These include faster printing speeds, improved accuracy, greater reliability, and the ability to use more complex print files.

How do I know if a certain motherboard is compatible with my Ender 3?

The best way to determine compatibility is to check the product description or contact the manufacturer.

What should I look for when choosing an Ender 3 motherboard upgrade?

When choosing an Ender 3 motherboard upgrade, you should consider compatibility, cost, installation, reviews, and support.

How difficult is it to install a new Ender 3 motherboard?

The level of difficulty will vary depending on the product you choose. Some motherboards are easier to install than others. If you’re not comfortable with electronics, it might be best to choose a board that’s easy to install.

How difficult is it to install a new Ender 3 motherboard?

The level of difficulty will vary depending on the product you choose. Some motherboards are easier to install than others. If you’re not comfortable with electronics, it might be best to choose a board that’s easy to install.

Who offers support for this product?

Be sure to pick a motherboard from a company that offers good customer support. This way, if you have any problems with the product, you can get help from someone who knows what they’re doing.

These are just a few of the most frequently asked questions about Ender 3 motherboard upgrades. By taking these into account, you can be sure to choose the right product for your needs.

Conclusion

If you’re looking for a way to take your ender 3 motherboard upgrade, consider upgrading the motherboard. This will allow you to enjoy faster printing speeds, improved accuracy, and greater reliability. 

Creality Ender 3 / Pro / V2 Plug and Play 4” Color Display Screen + v3.1 BL Touch + 4.2.7 32Bit Silent Board + Runout Sensor All-in-One Upgrade Kit for Auto-Bed Leveling + Improved UI on Stock Printer
  • Please contact F1rst Layer DIRECTLY for all your technical support needs! We are proud to announce the ultimate Ender series “Plug And Play” upgrade kit. Pairing a BL Touch, 4.2.7 Silent 32 Bit control board, Ender 3 V2 color display screen, filament runout sensor, and aluminum handle. All designed to work out of the box with F1RST LAYERS custom firmware flashed from the factory. F1rst Layer is an authorized distributor of all parts included in this kit. Update and download links in description
  • The BL Touch is an incredibly accurate and reliable auto mesh bed level sensor that probes individual spots for differences in Z height on any print surface with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Includes 1.5m extension cable for neat cable management solutions.

Be sure to choose a product from a company that offers good customer support in case you have any problems with the board. With a little research, you can find the perfect motherboard upgrade for your Ender 3 printer.

Leave a Comment