Make the right choice with confidence! Get access to expert advice from 55662 verified users and make sure you’re getting the best stainless steel water spigot. Don’t miss out on this great opportunity – seize it now for guaranteed satisfaction every time!
Top-Rated Stainless Steel Water Spigot Today
SaleBestseller No. 1
DOZYANT Updated More Durable Beverage Dispenser Replacement Spigot,Stainless Steel Polished Finished, Water Dispenser Replacement Faucet, fits Berkey and Other Gravity Filter Systems as Well
- Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
- Multi-Function – The DozyAnt Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light.
- Premium Quality –The DozyAnt Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance.
- Notice - Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly.
- Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our DozyAnt Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willingness.
Bestseller No. 2
Bekith 2 Pack Beverage Dispenser Replacement Spigot, Stainless Steel Polished Finished Water Drink Dispenser Replacement Faucet
- Bekith 2 pack durable beverage dispenser replacement spigot makes serving easy, keeping your dispensers running more efficiently
- Made of high quality lead free food grade stainless steel, non- corrosive and extremely durable. No lead, no rust and leak-free, they can last a lifetime under proper appliance.
- Fits 5/8 of an inch or 16mm openings and fits beverage dispenser up to 11/16 inch or 17 mm thick. Works for most self-serve and traditional beverage service.
- Ideal for dispensing your favorite lemonade, sun tea, kombucha, wine, juice or water at parties and wedding receptions.
- Tips: Wash before use. For easy assembly use a ¾ inch wrench to tighten the nut, do not over-tighten, for optimum care rinse after using when nut is loosened and handle partially opened.
Bestseller No. 3
X-Chef 2 PCS Beverage Spigots Beverage Dispenser Spigot Replacement Stainless Steel Spigot for Glass Jar & Drink Dispenser
- VERSATILE: The X-Chef Beverage Spigots Faucet is great for dispensing lemonade, sun tea, kombucha, wine, juice or water at parties and wedding receptions. 2 pieces drink dispenser spigots in one set can be used for a long time.
- LIFE LONG USE: Durable and corrosive-resistant, this glass jar spigot is made of premium stainless steel . No lead, no rust and leak-free, they can last a lifetime under proper appliance.
- FIT MOST DISPENSER: The Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm deep, compatible with most home use jugs, canisters and more.
- STEADY FLOW: The X-chef Dispenser Spigot provides steady flow of your beverage and do not clog after easy installation. You can rinse thoroughly by clean water before use.
- Satisfying After-sale Service. We have confidence in our quality product line. If you are not satisfied with our replacement spigots, please do not hesitate to contact us.
Bestseller No. 4
Replacement Spigot for Beverage Dispenser, Stainless Steel Spigot for Drink Dispenser, Water Dispenser Faucet, Food Grade, with Anti-Clogging Cap (1PACK)
- Premium Quality :Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, no rust and leak-free。Designed to last you years unlike cheap inferior plastic spigots on water container or other dispensing crocks or jugs that break quickly.
- Universal Fit: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.with tight seal silicone gaskets insure no leaks.
- Multi-Function:Works for most self-serve and traditional beverage service.Is perfect for your glass or plastic sun tea and Kombucha tea dispensers; Ideal for dispensing your favorite lemonade, wine, juice or water at parties and wedding receptions.Fits all Berkey Stainless Steel models. Will not fit Berkey Light.
- Notice:Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly.
- Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our Beverage Dispenser Replacement Spigot, just contact us, we’ll settle the issue according to your willingness.
Bestseller No. 5
BTSKY™Stainless Steel Beverage Dispenser Replacement Spigot Fits 16mm（5/8 inch）Opening - No Lead Dispenser Replacement Faucet, Polished Finish
- Multifunction Replacement Spigot: stainless steel spigot for beverage dispenser, juice jar or wine barrel or or any other beverages. A great addition to outdoor parties, receptions, hotel dining rooms,or any other events
- Quick Installation: this replacement spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick
- Premium Quality : This Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable, good for health and with a long life with proper appliance
- Notice: Please wash it before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten;Do not over-tighten, clean thoroughly after each use, keep in open position for storage
- Excellent Flow with No Leaks: This stainless steel spigot will not only look nicer but will dispense any juice or drinks efficiently, unlike plastic or low-quality spigots that tend to leak, crack or splash water or juice everywhere, this spigot has an excellent continuous flow
Bestseller No. 6
Sumerain Spigot for Beverage Dispenser,SUS304 Stainless Steel Metal Spigot Dispenser for Jar, Juice,Cold Drink,Wine,Beer
- Spigot for Beverage Dispenser Using for Gravity Filter Systems of Cold Beverages, Water, Juices, and Kombucha Tea etc
- Premium Quality Material. Beverage dispenser spigot is made of the highest quality 304 Stainless Steel, It will not rust and no Lead included.
- Exempts disassemble cleaning design for easy clean. Please tear off the blue protective film on the escutcheon surface before installation.
- Quick Installation design for this stainless steel spigot, easy to install and use. Please refer to the video about how to install this beverage dispenser spigot.
- Cartridge Tested with for more than 500,000 times to ensure a trouble-free operation of the drink dispenser spigot.
Bestseller No. 7
Beverage Dispenser Replacement Spigot, SUS304 Stainless Steel 5/8" or 16mm, Polished Finished, Dispenser Replacement
- Easily and Quickly Installation: This Beverage Dispenser Replacement Spigot requires a 5/8 inch or 16 mm diameter opening for installation. It is suitable for dispenser walls up to 11/16" or 17 mm thick.
- Premium Quality and Healthy: The Stainless Steel Replacement Spigot is made of high quality fine food-grade #304 stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance.
- Multi-Function: Beverage Dispenser Replacement Faucet is ideal for dispensing tea, kombucha, wine, water jugs, mason jars and beverage containers. Suitable for all Berkey stainless steel models. Not suitable for Berkey Light.
- Easy to Clean: The Dispenser Replacement Spigot provides steady flow of your beverage and do not clog after easy installation. You can rinse thoroughly by clean water before use or clean it by dishwasher.
- LIFETIME GUARANTEE AND WARRANTY: If you don't like our Beverage Dispenser Replacement Spigot at any time for any reason, will will give you your money back immediately. We stand behind all of our products without reservation, and we use them in our home every day.
Bestseller No. 8
Beverage Dispenser Replacement Spigot,Oak Leaf Stainless Steel Spigot Polished Finished, Dispenser Replacement Faucet
- Universal Fit: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
- Premium Quality: The Oak Leaf Spigot is made of fine food-grade 304 stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance.
- Multi-Function: The Oak Leaf Beverage Dispenser Replacement Faucet is great for dispensing tea, wine, water, juices and other beverage. Works for most self-serve and traditional beverage service.
- Quick Installation & Steady Flow: Wash before use. If necessary, use ¾ inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. Strong and easy-to-use lever ensures smooth and steady dispensing every time.
- Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our Oak Leaf Beverage Dispenser Replacement Spigot, just contact us, we’ll settle the issue according to your willingness.
Bestseller No. 9
Akamino Spigot for Beverage Dispenser, Stainless Steel Lever Pour Spout Water Dispenser Replacement Faucet for Berkey and Other Gravity Filter Systems,Gold
- Food Grade Material -- Our Beverage Dispenser Replacement Spigot are made of 304 food grade stainless steel and ball valve is made of ceramics,which will not rust and good for health which dislike those low-quality plastic faucets.
- Easy To Install -- Comes with all of the necessary hardware and fits 16mm(5/8'' ) To 19mm(3/4'') Diameter Opening. The silicone gasket has been thickened, and we also provide a mouth plug to prevent the tap from dripping.
- Widely Application -- The stainless steel Faucet is polished and brushed that great for mason glass dirnk jar,cooler beverage juice cola coffee dispenser and other dispensers.
- Notice -- Wash and tear off the Blue protective films on the washers before use. If water leak in, please adjust the nut.
- Satisfaction Service -- If you have any dissatisfaction after receiving our Water Dispenser Replacement Faucet, please feel free to contact us. We will replace it for you immediately, so you can buy with confidence.
Bestseller No. 10
Replacement Spigot Faucet Tap For Beverage Dispenser Stainless Steel Lever Pour Spout For Glass Drink Jar Bucket Ceramic Porcelain Crock Water Dispenser Gravity Filter systems（16MM）
- MUGLIO faucets made of high quality 304 stainless steel, food grade, corrosion resistant.
- Please wash it before use,do not over-tighten,clean thoroughly after each use, keep in open position for storage.
- Flexible control of water switches to reduce waste and protect the environment.Well-seal design to prevent leakage. Fine polishing and high gloss coating ensures long time using.
- Stainless steel spigot can be applied to most dispensers, such as glass dirnk jar, Ceramic Porcelain Crock water container dispenser, cooler beverage juice cola coffee dispenser etc,all other that Fits 16mm(5/8'' )Diameter Opening.
- 100% SATISFACTION GUARANTEED: We at MUGLIO stand by our customers. If for any reason you are not satisfied for any reason we will refund your money. With us you will always order with confidence
Bestseller No. 11
RAINPAL RBS006 Stainless Steel Rain Barrel Spigot (Quarter Turn Ball Valve)
- Attention: Inside Access Needed to Install the Nut
- Stainless Steel 304 Body w/ Aluminum Alloy Handle. No Lead, Corrosion Resistant.
- Stainless Steel Quarter Turn Ball Valve, Turn Right to close.
- For all ball valve, there is a chamber around the ball may trap water. May contain water from testing, which is normal.
- Fit up to 1/4 inch thickness wall, 10 mm water flow opening, With Garden Hose Hook up. Need 21mm or 7/8 inch hole saw to install.
SaleBestseller No. 12
Tru-Steel Stainless Steel Spigot - Fits BERKEY Systems, Alexapure Pro, ProPur Systems & Beverage Dispensers with 5/8" Openings
- Tru-Steel Stainless Steel Spigot - Fits BERKEY Systems, Alexapure Pro, ProPur Systems & Beverage Dispensers with 5/8" Openings
Bestseller No. 13
Vila Beverage Dispenser Replacement Spigot, Stainless Steel No-Rust Spout, BPA Free, Installation under 10-Minutes, Excellent Continuous Flow, Sturdy, Stylish Alternative for Flimsy Plastic Taps
- Multifunction Replacement Spigot --- If you want to impress your guests with a neat, efficient drinks dispenser, you will love this 304-grade stainless steel replacement spigot by Vila. They can be used to dispense tea, wine, water, coffee, punch, or any other beverages! A great addition to outdoor parties, receptions, hotel dining rooms, or any other events.
- Fits On Most Water Crocks, Glass Jars And More --- You will need a 5/8 inch or 16mm diameter opening to install. These taps can be attached to most kombucha jugs, mason jar dispensers, stainless steel water crocks, hot water urns, and many other drink dispenser jugs.
- Excellent Flow With No Leaks --- Most mason jars or crocks come with plastic spigots, and these metal ones will not only look chic, but will dispense any juice or drinks more efficiently. Unlike plastic or low-quality spigots that tend to leak, crack or splash water or juice everywhere, these spigots have excellent continuous flow.
- Durable Beverage Faucet --- This Vila dispenser spout is made with grade 304 stainless steel which will not rust even after multiple uses. The raw material makes it durable to use for years to come. After using sugary drinks we strongly recommend rinsing in soapy water to ensure there is no sugary syrup left on the inside.
- Quick And Easy Installation --- Please wash the spigot before use. The spigot dispenser has a thread pitch of 1.25MM/0.05inch and rubber gaskets. This can be screwed into a 5/8 inch or 16mm diameter opening. If you have normal grip strength you do not need any tools. If you have weak hands use a 3/4 inch wrench for the nut, but do not over-tighten. Your metal and glass jar faucet will last a lifetime if you take proper care of it.
Bestseller No. 14
Emica Home Beverage Dispenser Replacement SUS304 Stainless Steel Spigot with Screen Filter, Water Dispenser Replacement Faucet, Cold Drink Water Tea Wine Barrel Beer Faucet (12mm)
- Beverage Dispenser Replacement Spigot: Classic look, made of premium SUS304 stainless steel, no corrosion or limescale, polished finish, rustproof.
- with Screen Filter: Our quality stainless steel beverage dispenser replacement spigot with screen will filter tea leaves and other particulates.
- Drip Free: Equipped with SUS304 stainless steel gasket, food grade silicone mat, ensure no drip. No more spilling and mess all over the table and ground.
- Easy Installation: Fits dispenser wall up to 13 mm thick. Needs 12mm diameter opening to install. If necessary, use 3/4 inch wrench for the nut, do not over-tighten.
- Usage Tips: Wash and tear off the blue protective films on the washers before use. Please do not be used as a water pipe faucet. Wash before use. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly. Clean thoroughly after each use, keep in open position for storage.
Bestseller No. 15
VitaLifePower Stainless Steel Beverage Dispenser Stainless Spigot Push Style Spigot Faucet For Home Parties, Sun Tea,Water or Kombucha（2 PCS)
- PACKING --Two Spigot, Four silicon sealing washers, Four thin stainless steel washers, two stainless steel fastening nut and two blockage cap.
- QUICK INSTALLATION– This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 17mm thick.
- MULTI FUNCTION--The Beverage Dispenser Replacement Faucet is great for Dispensing Tea, water, juices and other beverage.
- PREMIUM QUALITY--The Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance.
- EASY TO USE -- With a diameter of 16mm, the outlet of the tap has a constant, moderate and even flow. Older and younger generations can use this easily and without dripping.
Bestseller No. 16
MOLIGOU Stainless Steel Replacement Spigot with Screen Filter, 2 Pack Beverage Dispenser Spigot Replacement, Polished Finished, Fits 5/8 inch Opening
- MATERIAL: Made of solid 304 stainless steel, no lead, corrosive-resistant, can be used for a long time, two rubber washers are for a tight seal
- SIZE: Fits 5/8 inch (16mm) openings, dispenser wall thickness could up to 11/16 inch (17mm)
- FAST FLOW WITH NO LEAKS: The stainless steel replacement spigot allows a quick, steady flow for your convenient use, comes with the screen filter to prevent the spigot from being clogged
- EASY INSTALLATION: No tools needed, if necessary, you could use 3/4 inch wrench for the nut, but do not over-tighten, the simple construction and nice polished finished make the spigot easy to keep clean
- PERFECT FOR: Replacing the spigot for iced tea jar, glass beverage dispenser, water crock, glass bottle container etc, as long as your dispenser has the right size to install, upgrade the containers and finish the nice look of them
Bestseller No. 17
Sumerain Beverage Dispenser Spigot,Premium Stainless Steel Spigot Dispenser for Jar, Juice,Cold Drink,Wine,Beer
- Beverage dispenser spigot using for gravity filter systems of cold beverages, water, juices, and kombucha Tea etc. Please carefully confirm the size of the spigot and your beverage dispenser before buying.The threads diameter is 16mm, we recommend the installation hole on your beverage dispenser is 16mm to 20mm.
- Premium quality material. made of the highest quality 304 stainless steel, this dispenser replacement spigot will not rust and no Lead included.
- Exempts disassemble cleaning design for easy clean. Please tear off the blue protective film on the escutcheon surface before installation.
- Drink dispenser spigot with quick installation design, easy to install and use. Please refer to the video for how to install this beverage dispenser spigot.
- Cartridge tested with for more than 50 million times to ensure a trouble-free operation of the stainless steel spigot.
SaleBestseller No. 18
Stainless Works SSS012 Stainless Steel Beverage Dispenser Replacement Spigot (fits 1/2 inch Opening)
- FIRST ON AMAZON: Launched on Mar 11, 2014, Stainless Works is the first brand for stainless steel spigot on Amazon.
- SOLID 304 STAINLESS STEEL CONSTRUCTION: No Lead, Acid Resistant. Great for Dispensing Tea, Beverage, Vinegar or Wine.
- Fast FLOW RATE: Quarter-Turn Stainless Ball Valve, 5 Seconds Per Cup. First Picture in Open Position, Turn Right to Close.
- UNIVERSAL FIT: Needs 1/2 inch or 12mm diameter opening to install.
- Easy Lifetime replacement warranty backed by OLDEGG INNOVATIONS, LLC, Connecticut, USA
SaleBestseller No. 19
Genuine Berkey Stainless Steel Spigot
- TIMELESS STYLE: Sleek stainless steel design fits any decor.
- Fits all Stainless Steel Berkey Systems
- EASY TO CLEAN: An occasional quick wipe keeps it looking new
- QUICK INSTALLATION: Effortlessly replace existing spigot—no tools required
Bestseller No. 20
VitaLifePower Stainless Steel Spigot For Beverage Dispenser Carafe, Beverage Dispenser Replacement SpigotFor Home Parties, Sun Tea, Water or Kombucha
- PACKING --One Spigot, two silicon sealing washers, two thin stainless steel washers, a stainless steel fastening nut and blockage cap.
- QUICK INSTALLATION– This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 17mm thick.
- MULTI FUNCTION--The Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage.
- PREMIUM QUALITY--The Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance.
- EASY TO USE -- With a diameter of 16mm, the outlet of the tap has a constant, moderate and even flow. Older and younger generations can use this easily and without dripping.
It can be hard to know which stainless steel water spigot is the best to buy. This was especially true in the past when there were fewer review websites and shoppers had to rely on word-of-mouth from friends and family. With so many stainless steel water spigot available on the market, it’s no wonder that people are often overwhelmed when they go shopping. In this blog post, we’ve outlined some stainless steel water spigot to buy. We hope that you find these tips helpful!