Make the right choice with confidence! Get access to expert advice from 1379 verified users and make sure you’re getting the best stainless steel push button switches. Don’t miss out on this great opportunity – seize it now for guaranteed satisfaction every time!
Top-Rated Stainless Steel Push Button Switches Today
- Material: Durable Stainless Steel button and body, Plastic, Electric Parts.
- Switch rating : 5A/250V AC. Easy to install: Screw clamp type terminals, don’t need to solder.
- A push button is a momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. An automatic mechanism (such as a spring) returns the switch to its default position immediately afterwards, restoring the initial circuit condition.
- Operating temperature: -20~+55 ℃. Contact resistance: less 50 MΩ. Insulation resistance: over 1000 MΩ.
- Commonly used as vehicle horns, ignition switch, doorbells, home appliances button,and car, engineering equipment project.
- GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.
- Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4''/19mm
- 19mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO
- Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles
- High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
- Easy to Install: Silver Stainless Steel Flat Round Momentary Pushbutton Switch with Blue light. Push & Hold, ON; Release, OFF. Hole size required: 0.74''/19mm.
- Blue Push Button Switch: The led button switch and LED light are separated, the LED light can be on all the time or only on when the switch is in on mode, depending on how you wire it.
- Built to Last: Made of high-quality stainless steel, durable and anti-rust, the lifetime can up to 500,000 cycles. IP65 waterproof can be used in a wet or dusty environment.
- Widely Used: Can be used as a switch for various additional electric equipment, inside & outside the car (such as car horns, critical lights, fog lamps, dome light, fuse boxes, and other electric products).
- Free Warranty: No risk purchase, any questions about this Linkstyle momentary push-button switch please contact us!
- ATTENTION: This is a Momentary Push Button Switch! Push & Hold, ON; Release, OFF, Contact Configuration: 1NO1NC
- Brand New Silver Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 3/4" /19mm
- GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.
- Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles
- High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
- The button is exquisite in appearance and good in touching feel.
- Adopting stainless steel housing, not easy to damage and durable.
- IP65 protection level, 6-pin switch for higher safety and stability.
- DC3-6V 22mm 6 pin reset push button switch with excellent quality.
- Easy to operate and convenient to use, it has long service life.
- ATTENTION: This is a Momentary Push Button Switch! Push & Hold, ON; Release, OFF, Contact Configuration: 1NO1NC
- Brand New Silver Stainless Steel Ring LED Momentary Pushbutton Switch;LED voltage: 12V only, Hole size required: 0.63''/16mm
- Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles
- High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
- GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.
- GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.
- Brand New Silver Stainless Steel High Round Pushbutton Switch; Voltage: 250V, 5A. Hole size required: 0.74''/19mm
- 19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO
- Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles
- High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
- Our Push Button Switch CE certification.High quality metal 304 Stainless Steel material .IP67 waterproof protection can be used in wet or dusty enviroment.Switch Name: J22-C-272。
- Rated current (Resistive Load) 15A ; LED voltage: 12V DC/AC , Hole size required: 7/8''/22mm
- Contact: 2NO.22mm Momentary Push Button Switch: Push and Hold-ON, Release-OFF.
- 4.8 mm wide X 0.8 mm thickness Terminal Pin for High Current Use; Mechanical Life: 1,000,000 times.The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it
- Package include : 1* 22mm Push Button Switch 15A , 1*Wire Socket Plug 1.5mm² .
- GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.
- Brand New 16mm Latching Switch; Silver Stainless Steel Ring LED; LED voltage: 12V only, Hole size required: 0.63''/16mm
- Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC; 12 volt switch
- Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles
- 12v on off Switch; High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
- GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.
- Brand New Silver Stainless Steel High Round Pushbutton Switch; Hole size required: 0.63''/16mm
- 1NO Momentary switch: Push & Hold, ON; Release, OFF. Contact Configuration: 1NO
- Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles
- High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
- Specifications: 12mm Momentary push button switch without Led(6PCS).
- How to use: The button switch operation type of this product is Momentary, keep pressing and holding the button = ON, hand off the button = OFF).
- Mounting hole size: 0.5"/12mm, please check the size carefully before purchasing.
- This switch can be used for: cars, ships, trucks, homes, coffee machines, industrial equipment, medical equipment, etc.
- Waterproof: As the product has IP65 Waterproof, it is very suitable for use in marine applications such as ships.
- Brand New Silver Stainless Steel Ring LED 19mm Latching Push Button Switch; LED voltage: 12V -24V DC, Hole size required: 0.74''/19mm
- Latching switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC
- Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles
- High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
- GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.
- ✪Push buttons hole diameter:22mm, Push buttons hole thread:1mm.
- ✪High quality metal material & IP65 waterproof protection can be used in wet or dusty environment.Metal shell,100% brand new and high quality, mechanical life for 500,000 cycles.
- ✪The switch and LED are separated, LED can be on all the time or only on when switch is on, depending on how you wire it.
- ✪Can be used as a switch for various additional electric equipment, inside & outside the car.(Such as critical lights, chassis lamp, fog lamps, dome light).
- ✪After-sales service:Customer satisfaction is our greatest pursuit, if you found that our products do not work or quality not as good as you think, please contact us without hesitation.
- IP67 waterproof protection can be used in wet or dusty enviroment.Our Push Button Switch through UL certification and CE certification.
- Mounting Hole Size: 19MM / 0.75'', Swith Rating: 3A 12V~250V AC/DC. Switch Combination:1NO SPST, Ambient Temperature:-25℃ TO +55℃
- Head Shape: Flat Round, Shell color:Silver,Shell material:Stainless Steel 304.Total length: 26mm (1.02'')
- 19mm Momentary Push Button Switch: Push & Hold, ON; Release, OFF, Contact Configuration: 1NO
- Package Content Include: 2PCS * Push Button Switch .If you have any question, please be free to contact us. We offer free replacement or full refund.
- Stainless steel Panel with Elegant Style
- 500000 Cycles tests
- Suitable for Door: Hollow Door
- Output Contact: NO/COM
- This door release exit button can be used for any access control application and is commonly used in offices, banks, gas stations, department stores and many more
- GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.
- Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch; LED voltage: 12V only, Hole size required: 7/8''/22mm
- 22mm Latching Push Button Switch: Push it, ON; Push it again, OFF. Contact Configuration: 1NO1NC
- 4.8 mm wide X 0.8 mm thickness Terminal Pin for High Current Use; Longer work life: Electrical life: 500,000 times. Mechanical Life: 2,000,000 times.
- High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment.
- Push buttons hole diameter: 12mm, Push buttons hole thread: 0.75mm. 4pcs Metal Latching Switch Push Button with IP67 protection: waterproof and rustproof,can be used in wet or dusty environment.
- Latching Switch mounting hole:12mm; Rated current and voltage: 3A/12V/24V/110V/250VAC.
- Used widely: Great for Horn Button Switch, PC Power Switch ect.
- 12mm push button type:Make it easy to install and disassembling.
- Quality after-sales service, if something is not up to your satisfaction,please contact us for a full refund or replacement.
- Mounting Hole Diameter: φ19mm
- LED voltage: 12V only ; Switch Rating : 250V 5A
- Shell Metarial:Stainless Steel (waterproof degsin)
- Self-locking Switch , Press the button switch work ; Press the button again ,switch stop work .
- Latching Push Button Switch can be applied to electric equipment ,appliance,machine , car motorcycle modificine ,home Lamps switch and so on
- [Ring LED 12mm Latching Push Button Switch] Push it - ON, Push it again - OFF. Contact Configuration: 1NO1NC; DC12 volt Self-locking Switch.
- [Aluminium Alloy Shell High Round Pushbutton Switch] 12mm 1/2" Mounting Hole, durable for a longer lifetime can up to 500,000 cycles.
- [Easy to Install] Round latching switch with screw clamp type terminals to make fitting very easy, 4 pins, multi-type wire connection. The LED light can be on all the time or only on when the switch is in on mode, depending on how you wire it.
- [Wide Application] High-quality metal material & IP65 waterproof protection can be used in a wet or dusty environment. This 12V push button switch is suitable for almost any motorized vehicle of motor starting, power starting devices, and can also be an access control button.
- [Quality Assurance Service] If you're not COMPLETELY SATISFIED with Linkstyle pushbutton switch, please feel free to contact us without hesitation, we provide a free return, a free replacement, or a full refund. NOTE: In order to avoid unnecessary misunderstandings, please read the relevant dimensions and parameters carefully.
It can be hard to know which stainless steel push button switches is the best to buy. This was especially true in the past when there were fewer review websites and shoppers had to rely on word-of-mouth from friends and family. With so many stainless steel push button switches available on the market, it’s no wonder that people are often overwhelmed when they go shopping. In this blog post, we’ve outlined some stainless steel push button switches to buy. We hope that you find these tips helpful!