Make the right choice with confidence! Get access to expert advice from 43175 verified users and make sure you’re getting the best stainless steel elbow fittings. Don’t miss out on this great opportunity – seize it now for guaranteed satisfaction every time!
Top-Rated Stainless Steel Elbow Fittings Today
Bestseller No. 1
2Pcs 304 Stainless Steel 90 Degree Elbow 3/4inch NPT Threaded Pipe Fitting Female x Male,Cast Pipe Fittings with 2 Tape
- Set: you will receive 2 pieces 90 degree elbow pipe fittings, and 1 roll of water-proof sealing tape; The combination of the two can help you connect the pipes better and more firmly, so that it does not leak and has good airtightness
- Standard thread: standard 3/4 inch NPT male x 3/4 inch NPT female threaded pipe fitting, deep threads can make the pipe fit well, not easy to slip, and easy to connect the pipes
- Quality material: the 90 degree elbow pipe fitting is made of quality 304 stainless steel, sturdy and durable, capable of withstanding high temperature, not easy to corrode, rust and wear, with good performance
- Application range: 90 degree elbow pipe fitting can be used to connect water pipes, automobiles or other mechanical maintenance, and is a basic accessory for electric steam construction tools
- Size: 6.6 x 4.1 cm/ 2.59 x 1.6 inch, thread outer diameter is 26.5 mm/ 1 inch, and thread inner diameter is 24 mm/ 0.94 inch
SaleBestseller No. 2
S SYDIEN 2Pcs 304 Stainless Steel 90 Degree Elbow 1/2" NPT Threaded Pipe Fitting Female x Male
- 👍Package Content:2Pcs 90 Degree Elbow Pipe Fittings.Model:Female to Male.Connection:NPT-NPT.Thread Size:1/2" NPT Thread.Outer Diameter:20mm/0.79".
- 👍High-quality 304 stainless steel.Strong and resistant to temperature, rust and abrasion.
- 👍The thickened design of the elbow wall can make its service life longer.
- 👍Socket openings on both ends.Suitable for connecting two thread pipes at a 90°angle to connect,terminate,control flow and change the direction of piping.
- 👍Suitable for electrician,water pipe,automobile,non-motor vehicle and other mechanical maintenance.
Bestseller No. 3
Beduan Stainless Steel Cast Pipe Fittings 90 Degree Barstock Street Elbow 1/4" NPT Male x 1/4" NPT Female Water Fuel Air
- Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability.
- Type: 1/4" Male x 1/4" NPT Female thread. This fitting is suitable for small flow air/gas pipes or water/fuel/fluid line. If you want to get a larger flow, we recommend to use (1/4" Male x 1/4" Female (L Type)) ASIN:B094XSLR3S which is in the same listing.
- Operating temperature: range from -65 to 250 degrees F.
- 90-degree elbow for changing flow direction between pipes.
- Fitting connects to Male thread on one end and has a Female connector on the other.
Bestseller No. 4
TAISHER 2PCS 304 Stainless Steel 90 Degree Barstock Street Elbow, 1/4 Inch NPT Male Pipe to 1/4 Inch NPT Female 304 Stainless Pipe Fitting
- Product Type —— Adapter(1/4"Male NPTx 1/4"Female NPT) with protective case,for industry connecting pipes or fittings with different end types, diameters, or materials,NPT thread size does not actual diameter, it is only nominal pipe size.
- Product Material —— Forging of 304 stainless steel strength and resistance to corrosion.
- Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c.
- Maximum Pressure —— Maximum working pressure is 2800PSI.
- Special Feature —— The quality of forged stainless steel is better than casting.
Bestseller No. 5
Stainless Steel 304 Cast Pipe Fitting,JoyTube 1/2" to 1/2" Female to Female NPT Threaded Pipe Fitting, 90 Degree Elbow, Class 150 (Pack of 3)
- 90-degree elbow for changing flow direction.
- Female National Pipe Taper (NPT) threads for connecting two pipes.
- 304 stainless steel for strength, lower carbon content for greater resistance to corrosion.
- 1/2" to 1/2" female to female
- Maximum working pressure of 150 psi; Temperature range from -30 to +150 degrees F.
Bestseller No. 6
ORLEIMI Pipe Elbow 90 Degree NPT 1/2 Inch Female Plumbing Thread Pipe Fittings 304 Stainless Steel Silver Elbow Plumbing Thread Pipe Fittings 2 Pack
- 【All Metal Construction】:304 stainless steel,Makes our 1/2 Tee Pipe Adapter Resistant to Corrosion,high temperature,acids, salts, and other minerals
- 【Function】: Pipe Elbows,90 degree elbow pipe metal cast pipe fittings best for DIY furniture,decor or bath projects
- 【Reliable Design】: NPT 1/2" Female to NPT 1/2" Female 90 degree,90-degree elbow design is for connecting two pipes or fittings at an angle
- 【Package】: 2 packs,include two pieces
Bestseller No. 7
Hooshing Stainless Steel Pipe Fitting 90 Degree Street Elbow 1/2" NPT Female x 1/2" NPT Male, 1 Pack
- Size: 1/2" NPT Female x 1/2" NPT Male (National Pipe Taper female to male threads)
- Matertial: Made of heavy duty stainless steel 304, durable, strong and corrosion resistance.
- Suitable for connecting two thread pipes at a 90°angle to connect, terminate, control flow and change the direction of piping.
- Great designed for water filters. Size fits perfectly to wide ranges of pipes and filters. And is specially designed for shower head sink shower filter.
- Widely used for electrician, water pipe, automobile, non-motor vehicle, mechanical employments and other mechanical maintenance.
Bestseller No. 8
SuperWhole 3/4" Elbow 90 Degree Angled Stainless Steel 304 Female Threaded Pipe Fitting NPT
- Operating temperature range of -65 to +250 degrees F
- Shape: Elbow (Female x Female ),Connection:NPT-NPT.Measurement: 3/4"
- Female National Pipe Taper (NPT) threads for connecting two pipes
- Relative softness of metal enables tighter seals and greater ease in installation
- Made of Stainless Steel 304 for resistance against corrosion from water, heat, acids, salts, and other minerals
Bestseller No. 9
Horiznext 90 Degree Elbow npt 1/2" Stainless Steel Street Pipe Fittings
- Made of stainless steel 304, heavy duty, durable and corrosion resistance
- 1/2 x 1/2 NPT (National Pipe Taper female to male threads)
- Great for attaching NPT 1/2 female thread, andNPT 1/2 male thread fittings and pipes
- Maximum working pressure of 290 psi
- Temperature range from -100 to +660 degrees ℉
Bestseller No. 10
GASHER 2Pcs Stainless Steel Pipe Fitting 90 Degree Barstock Street Elbow ,3/8-Inch Male Pipe x 3/8-Inch Female Pipe
- Maximum working pressure: 3600PSI
- Use purpose：3/8 Inch MNPT x 3/8 Inch FNPT threads for connecting to threaded pipe fittings,NPT thread size does not actual diameter, it is only nominal pipe size.
- Temperature range: -300 degrees Fahrenheit to +392 degrees Fahrenheit temperature range allows you to handle your project in any environment
- Package Included:2 x 90 Degree Barstock Street Elbow
- Material: All parts are made of 304 stainless steel, which is hard and will not rust.
Bestseller No. 11
Sydien 1Pc 304 Stainless Steel 90 Degree Elbow 1" BSPT Threaded Pipe Fitting Female x Female
- 👍Package Content:2Pcs 90°Elbow Pipe Fittings.Type:1" BSPT Threaded.Operating Temperature Range:-20℃ ~ 200℃/ -4℉ ~ 392℉.
- 👍Inner Diameter:33mm/1.30".Outer Diameter:39.5mm/1.56".Height:56mm/2.20".
- 👍Made of high-quality 304 stainless steel,which is durable and resistant to temperature,rust and abrasion.
- 👍Thickened design of elbow wall can make its service life longer.Even in the harsh heavy duty environment with high humidity and high temperature, it is not easy to be damaged.
- 👍Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping.
Bestseller No. 12
Metalwork 304 Stainless Steel Forged Pipe Fitting, 90 Degree Street Elbow, 3/8" NPT Female x 3/8" NPT Male, 2000psi, 1 Pc
- 90-degree elbow for changing flow direction
- 3/8" Male and 3/8" female National Pipe Taper (NPT) threads for connecting two pipes
- Made from stainless steel 304 for corrosion resistance
- Max Pressure: 16MPa/2320psi; Working Temperature Range: -50℃~+200℃/-58℉~+392℉
- Not include lead, can be used for potable water.
Bestseller No. 13
Stainless Steel 3/4" NPT Female Threaded Elbow ,90 Degree Female to Female NPT Threaded Pipe Fittings 2 Pack
- Elbow: for connecting two pipes,Connection thread diameter of 1.05 inch male thread
- Standard thread: American standard pipe thread NPT taper thread
- Material: Stainless steel is corrosion-resistant, high-strength, and durable
- Operating temperature: -65 to 250 degrees F
- Maximum working pressure ：300PSI
SaleBestseller No. 14
TAILONZ PNEUMATIC 304 Stainless Steel Male Elbow - 1/4 Inch Tube OD x 1/4 Inch NPT Thread Push to Connect Tube Fitting PL-1/4-N2 (Pack of 2)
- 【Product Name】 Male Elbow Push to Connect Fittings
- 【Material】Stainless Steel
- 【Size】1/4" Tube OD x 1/4" NPT Thread，Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
- 【Maximum Pressure】435si【Working Temperature】-4～392°F
- 【Applicable Tube】PU / PA / PE / PVC
Bestseller No. 15
TAISHER 10PCS 304 Stainless Steel 90 Degree Elbow Fittings, 1/4 Inch NPT Female Pipe to 1/4 Inch NPT Female 304 Stainless Pipe Fitting
- Feature - Product Type —— 90 Degree Elbow Fittings(1/4" NPT) for industry connecting pipes or fittings with different end types, diameters, or materials.
- Function - 1/4" National Pipe Taper (NPT) threads on one end and 1/4" NPT threads,NPT thread size does not actual diameter, it is only nominal pipe size.
- Material - 304 stainless steel strength and resistance to corrosion.
- Rating - 300 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
- Easy to Used - Deep thread, easy to connect, not easy to fall off
Bestseller No. 16
1/4 Union Elbow Push to connect fittings Stainless Steel Tube Fittings Push Connectors,CEKER 1/4" x 1/4" OD Tube Quick Connect Fittings Air Line Fittings 2pack
- Type:1/4" Od x 1/4" Tube Od Push to Connect Air Tube Fittings; Body Style: 90°Degree Elbow Push in fitting
- 1/4 Stainless Steel elbow tube fittings Fluid Admitted: Air, Water (No Freezing)
- 1/4 union elbow quick connect fittings Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
- 1/4 elbow air line fittings Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32～140°F
- 1/4 elbow air fittings Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass; corrosion resistance, ductility
Bestseller No. 17
Joywayus 1/2" Hose Barb x 1/2" NPT Male Home Brew Pipe Fitting Stainless Steel 90 Degree Elbow Adapter
- Connections: Hose Barb x NPT Male.
- Temperatures range from -40 to 160 F.
- Higher corrosion resistance than brass.
- Adapter for connecting a hose to a male threaded connection of a different diameter.
- Stainless steel for corrosion resistance,ductility at high temperatures, and low magnetic permeability.
Bestseller No. 18
Stainless Steel Pipe Fitting,90 Degree Barstock Street Elbow, 3/8" NPT Female x 3/8" NPT Female (Pack of 2)
- Size: 3/8" NPT female thread x3/8" NPT female thread,used to connect male threads with a thread diameter of 0.675 inch. NPT thread sizes are nominal pipe size , not represent actual thread diameters. Please confirm the size before purchase
- Durable: The product is made of high-quality stainless steel, sturdy and durable, and anti-corrosion
- Working range: Max Pressure: 16MPa/2300psi; Working Temperature Range: -50℃~+200℃/-58℉~+392℉
- Products include: 2 x 90 Degree Street Elbow
- Lead-free: can be used for drinking water.
Bestseller No. 19
GDFYMI Pipe Fittings, 1/2" NPT 90 Degree Elbow, 304 Stainless Steel Barstock Street Elbow, Cast Pipe Fitting, Right Angle Ell 1/2" Male x 1/2" Male (2Pcs)
- 👍【Package Included】2 Pcs 90 degree elbow 1/2" Male x 1/2" Male NPT for connecting two female threaded pipes or fittings at an angle.
- 👍【Working Pressure】Maximum working pressure is 290 PSI.
- 👍【Operating Temperature】Range from -20℃ to 200℃/ -4℉ to 392℉.
- 👍【Premium Material】Casting of 304 stainless steel strength and resistance to corrosion, for ductility at high temperatures, and durability.
- 👍【Widely Used】Pipe elbow for changing flow direction, and for industry connecting pipes or fittings with different end types, diameters, or materials.
Bestseller No. 20
Bonsicoky 2Pcs 90 Degree Street Elbow, 1" NPT Male x Female 304 Stainless Steel Street Pipe Fittings
- 【Packaging & Size】: 2 x 90 Degree Elbow Pipe Fitting, size: 1 inch NPT Female x 1 inch NPT Male, used to connect right angle pipes in different directions.
- 【Premium Material】: 90 Degree street elbow is made of 304 stainless steel, which is durable with strong rust resistance, corrosion and abrasion resistance.
- 【Temperature Range】: Cast pipe fitting can withstand temperatures ranging from -100 to +660 degrees Fahrenheit, so it can withstand changing temperatures and rain for years of use.
- 【Wide Practicality】: 90 degree street elbow has a maximum working pressure of 290 PSI.The valve is designed for use in gas-tight, closed pipelines that carry water, oil, gas and certain corrosive liquids. Suitable for electrical, plumbing, heavy duty commercial and residential applications.
- 【30 Days Money Back Guarantee】:We believe that Bonsicoky wins your trust with quality and service. If you have any quality problems, please contact us in time, we will give you a satisfactory answer within 24 hours. Click 'Add to Cart' now, bring you a 100% worry-free shopping experience!
It can be hard to know which stainless steel elbow fittings is the best to buy. This was especially true in the past when there were fewer review websites and shoppers had to rely on word-of-mouth from friends and family. With so many stainless steel elbow fittings available on the market, it’s no wonder that people are often overwhelmed when they go shopping. In this blog post, we’ve outlined some stainless steel elbow fittings to buy. We hope that you find these tips helpful!